Construction chemistry

Sort by:

Evaporation protection Antisol - E

Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Evaporation protection VIBASOL Curing TC

Version: Curing TC Is sprayed in a thin layer on fresh concrete surfaces that are further treated. The concrete surface is covered with a water-impermeable protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

De-icing chemical SNO-N-ICE

De-icing agent: Sno N Ice is an alternative to conventional road salt for use on concrete surfaces. An additive reliably prevents concrete from spalling and surface scaling (dusting).

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Water FIX sealing

WATERFIX wurde entwickelt, um Durchbrüche im Hoch- und Tiefbau dauerhaft, zuverlässig und einfach abzudichten. Bis 1 Bar wasser- und gasdicht! Es ersetzt herkömmliche Dichtsysteme wie z.B. RDS Rohr- und Kabeldurchführungssysteme, Muffen-/ Manschettenlösungen und Quetschdichtungen. WATERFIX ist geeignet für jegliche Art der Durchführung bei Wänden, Schächten, Fassaden oder im Dachbereich. Auch Fenster- und Türelemente können damit druckwasser- und gasdicht eingebaut werden. Der Spezialschaum kommt überall dort zum Einsatz, wo herkömmliche Systeme auf Grund von Form, Größe und Durchführungskonstellation nicht angewendet werden können. EINSATZBEREICHE DAS PRODUKT Spezialschaum wird in Weißblechdosen zu 400 ml Inhalt geliefert (15 Dosen pro Karton). Die Volumenausbeute einer Dose kann bis zu 7.000 ml betragen. Der aufgebrachte Schaum ist nach etwa 5 Minuten klebefrei, nach etwa 10 Minuten schneidbar und nach 20 Minuten ausgehärtet (jeweils bezogen auf einen 20 mm Strang). Die Temperaturbeständigkeit des aufgebrachten Schaumes liegt zwischen -30 °C und +80 °C. Die Dosen werden mit zwei dynamischen Mischdüsen, welche auch separat erhältlich sind, ausgeliefert. Zusätzlich ist ein Primer erhältlich, um bei Produkten aus Polyethylen (PE) und Polypropylen (PP) die Haftung zu erhöhen (siehe Punkt Anwendung). VORBEREITUNG: Die Haftflächen müssen trocken, fest, staub- und fettfrei sein. Bei PE- und PP-Rohren bzw. Kabeln sollten Sie einen geeigneten Tiefenprimer (PRIMER P 40) verwenden, um die Haft eigenschaften zu verbessern. Lassen Sie diesen gut abtrocknen, bevor Sie den Spezialschaum anwenden. WATERFIX haftet nicht auf Trennmitteln wie Silikonen, Ölen und Fetten. Die Verarbeitungstemperatur (Dose und Untergrund) soll zwischen +10 °C und +30 °C betragen.

Expansive grouting mortar Betec 140

Expansive grouting mortar is a mixture of Portland cement, finely graded quartz sand and reactive chemical additives that achieve a swelling effect. It is used for casting anchor bolts, steel and precast concrete columns, for machine foundations and for closing concrete openings.

Handmörtelpumpe für Quellvergussmörtel

Die Verfüllspritze Model 1 und Model 4 haben eine gerade Schlitzöffnung in verschiedene Breiten. Die Handmörtelpumpe ermöglicht das einfache verschließen von Betonöffnungen mit Quellvergussmörtel.

Kleber für Faserbetonrohre

Two component-special adhesive for water-proof bonding (incl. Hardener). Consumption for 1000 plugs 2 cm length: Ø 22 mm - ca. 3 kg Ø 27 mm - ca. 4 kg Ø 32 mm - ca. 5 kg Ø 40 mm - ca. 7 kg

Contact adhesive X 1 cartridge / 290 ml

High-quality, permanently elastic and varied Adhesive- and Sealing compound - permanently elastic - weatherproof - High tractive force - chlorine-resistant Package: 290 ml, 12 cartridge/carton (= 6,5 kg)

Cartridge gun for 310ml / cartridge

Cartridge gun used for cone glueing. Attention: Without Contact adhesive cartridge! The glue is a seperate article: Contact adhesive X1 cartridge / 290 mL

Insulation board adhesive 750 ml gun foam

The insulation board adhesive is a moisture-curing one-component polyurethane adhesive with low expansion for bonding and for the assembly of facade insulation boards (ETICS). After hardening, the insulation board adhesive is insoluble, waterproof, rot-proof, permanently elastic and can be plastered. The insulation board adhesive has a very good structure and offers excellent adhesion from + 5 ° C. The Braven Isokleber 750 is part of the product portfolio "Sustainable solutions for airtight construction". These products have been tested for thermal insulation, rain tightness and air leakage. When used correctly, these products help save energy in the building and are very close to energy-saving concepts such as passive houses and zero-energy houses. Benefits: B2 Efficient bonding of facade insulation panels Reduces working hours No water and no mixing on site No electricity needed Reduces storage requirements on the construction site Particularly environmentally friendly compared to conventional cement mortar

Gun cleaner 500 ml

The PU foam cleaner is a highly active cold cleaner for rinsing PU foam guns and removing fresh PU foam contamination. Field of use: PU foam cleaner was specially developed for removing fresh PU foam residues and for cleaning PU foam guns after use.

Gun well foam 750 ml

Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with moisture from the air and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections

PU foam gun

The assembly pistol for comfortable, effective work.The plastic tubes included in the original box are only to be used for exposed areas that cannot be reached directly with the foam gun.

Well foam 750 ml

The well foam is a moisture-curing, one-component polyurethane assembly foam in B2 quality for bonding manhole rings and pipe elements. Resistant to water, dilute nitric acid, dilute caustic soda and all acids and bacteria normally found in the ground. Field of use: Assembly of well manhole rings and pipe elements made of concrete with seam connections or tongue and groove connections. Connection of pipes made of clay and ceramics or pipes made of PVC.

Gun foam 750 ml

Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with humidity and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections

Mounting foam 750 ml

Mounting foam Contents: 750 mL Packaging: 12 pieces per box

Silicone-kit

Product description: The neutral silicone is a one-component oxime-linking silicone sealant for expansion joints in the construction sector. After use, the silicone hardens with humidity to form an elastic sealant. Field of use: Permanently elastic joint sealant for expansion joints in construction and facade areas. Ideal for window and door connection joints, shutters, window sills, balconies and parapets. Can also be used in the sanitary area. Protects against mold growth. Suitable for glass, treated wood, masonry, concrete, stoneware, ceramics, metal and other common building surfaces.