Type: EXTERNAL RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.
RiveStop PS mit Kunststoff Abdeckscheibe und Edelstahl Nietdorn. Für Tiefbau, Garagen, Tunnel. Druckwasserdicht bis 5 bar. Zertifiziert durch APPLUS. Zum Abdichten mit direktem Kontakt mit Wasser und ständige drückendem Wasser wird empfohlen RiveStop mit Edelstahl Niete (PS) zu verwenden. SCHRITT 1: Führen Sie RiveStop in die abzudichtende Öffnung ein. SCHRITT 2: Entfernen Sie den Nietdorn. Die Niete dehnt sich aus, bis die Öffnung hermetisch versiegelt ist.
TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.
For the INTERN RiveStop rivets A SIMPLE, FAST, COST-SAVING AND DURABLE SOLUTION The most suitable tool for installing RiveStop is an ambidextrous manual riveting machine with a long lever (nozzle size 4.8-5 mm / 0.18-0.19 in) or an electric riveting machine. Riveting is very quick and takes about 3 to 5 seconds per drill hole. If you use an electric riveting machine, it's even faster.