Sort by:
Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm
For shaft formwork, ceilings- door- and wall-recess
Easy and fast mounting and dismantling
For wooden formwork 12 - 35 mm thickness
The fast and universal solution for your construction site
Log in to see more information
Aussparungsrohre - Ausführung blank
Material: Steel blank, optional steel galv. Special materials on request.
Standardlength 3 m, other lengths on request.
Length tolerence for fixed lengths in mm: to DN 250 +/- 5m
Log in to see more information
Installationsbloc "Prottelith"
Product properties:
non-flammable
passable
insensitive to moisture
frost-resistent
easy perforation of openings
Bulk density: 300 kg m³, +- 5%
Compressive strength: 240 kPa (10% compression)
Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)
Log in to see more information
Ripped drawb netak Lochripp
Element size 250 x 60 cm
Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity.
Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork
Log in to see more information
Ribbed drawn metal Superrip
Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork
Element size 200 x 44.5 cm
Log in to see more information
Formwork stripes
The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15.
The profiling allows optimum connection in concrete.
Available in all heights from 14 to 36 cm.
Installation instruction:
1. Cut the needed length with a cutter from the roll.
2. Fold the formwork stripes in the required size.
3. Connect the overlapped endings with binding wire.
4. Nail the recess quiver sideward through the punch opening.
Log in to see more information
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m²
Advantages:
low dead weight of the plate
assembly possible without crane and other aids
prefabricated foundations with low installation time
environmentally friendly, not hazardous to water, material recycling possible
single or strip foundations can be made easily without additional tools
no abherent required
dimensionally stable
Log in to see more information
VIBA - formwork boads HB
Material: Wood concrete slab
Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm
Advantages:
lost formwork doesn't have to be removed from the concrete
easy mounting through screws or nails (light nailing)
Time saving
Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm
Fixing strips is made of the same material as VIBA shuttering board
Log in to see more information
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one.
50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm)
Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Log in to see more information
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete.
Element length - 200 cm
Material strength - 10 mm
Width at foot - 70 mm
Log in to see more information