The ActiveRing mini and maxi allow a safe and lasting sealing for fibre conrete- and plastic tubes. Easy and safe Sealing test MFPA Leipzig Good chemical resistance´ Waterproofing up to 8 bar
PVC-freier Abstandhalter Rundfix in schwerer Ausführung für senkrechte Bewehrung.
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With this design, the pointed feet achieve an optimal concrete flow and thereby reduce visibility in the concrete surface. Your advantage: Material polypropylene-PP Pressure-resistant / very high stability Ergonomic Transport-optimized (Euro pallet) Consumption approx. 1-1.5 pieces / m² patent pending MPA approved
Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested
Tunnel rebar char plastic for reinforcement Ø 8 - 10 mm. PRODUCT FEATURES: Best concrete flow through open shape. Strongly chamfered to protect the tunnel sealing. Rebar easy to insert through conical design of the seat.
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. The openings allow a balanced distribution of concrete. Mill length 200 cm. Other lengths on request.
Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)
U-shaped bar spacer made of PE plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.
Load-bearing construction, also suitable for heavy reinforcement. Shorter length than conventional bottom bar! Flexible and efficient installation thanks to a length of 80 cm. Can also be used upside down on soft surfaces. Test certificate on request.
Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.
ZZ ISO rebar spacer is a skidproofed and tilt secured spacer for the bottom reinforcement. The material is PVC free. There will be no shrinking as the concrete encloses the batten completly. Suitable for XPS, isolation or other soft surfaces. Due to the special form a linear interruption can be avoided. Tested according to DBV Merkblatt „Abstandhalter“ DBV – c – L1/F/T/A.
Impact-resistant, step- and tip-proof spacer for lower reinforcement. Prevents void formation and is fully encapsulated by concrete during pouring. Thanks to its special geometry, linear interruption of the concrete structure is avoided, ensuring structural continuity. Standard length: 200 cm
