CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Mit dem Stopper können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten. Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar
Mit dem Stopper IN Type können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden.
Mit dem Stopper können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten.Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.
High-class precisely tailored exposed concrete cone. After removing the pressure cones.
Fiber concrete - plugs for FC distance tubes. Usually glued inside the fiber concrete tube.
Two component-special adhesive for water-proof bonding (incl. Hardener). Consumption for 1000 plugs 2 cm length: Ø 22 mm - ca. 3 kg Ø 27 mm - ca. 4 kg Ø 32 mm - ca. 5 kg Ø 40 mm - ca. 7 kg
Cartridge gun used for cone glueing. Attention: Without Contact adhesive cartridge! The glue is a seperate article: Contact adhesive X1 cartridge / 290 mL
Material HDPE. Appropriate for tubes with an outer diameter of 22 mm
High-quality, permanently elastic and varied Adhesive- and Sealing compound - permanently elastic - weatherproof - High tractive force - chlorine-resistant Package: 290 ml, 12 cartridge/carton (= 6,5 kg)