Properties

Material:	HDPE
Passend für Rohr ø:	22 mm
Stück / Sack:	200

Plugs Vibadistanz Ø 22 mm

Product number: 65AGSF

Available, delivery time: 1-3 days

Price on request

Stück

Stk

Description

Material HDPE.

Appropriate for tubes with an outer diameter of 22 mm

Properties

Material:	HDPE
Passend für Rohr ø:	22 mm
Stück / Sack:	200

Zubehör

Grooved cone (VIBADISTANZ) Ø 22 mm

Grooved cone (Vibadistant) Ø 22 mm

Customers also viewed

Grooved cone (VIBADISTANZ) Ø 22 mm

Grooved cone (Vibadistant) Ø 22 mm

Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.

Spacer tubes with a roughened surface

Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle

Plugs unruffeld

Plastic plugs (colour gray) to close the spredaer after form removal.

Pressure cones (PVC-free) with glued sealing

Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline

Pressure cone standard (PVC-free)

The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.

Plugs unruffeld

Plastic plugs (colour gray) to close the spredaer after form removal.

Spacer tubes with a roughened surface

Rock anchor Ø 15 mm, aluminum, 3-part

Anker zur kraftschlüssigen Befestigung an vorhandenen Beton- oder Felwänden. Die Bohrlochtiefe hängt von der Gesteins- und Betonart ab. Sicherheitshinweis: - Ankerstelle vor der Belastung auf Tragfähigkeit prüfen.

Felsanker Ø 15 mm mit Zulassung

Zur temporären Aufnahme großer zentrischer Zugkräfte. Die Bohrlochtiefe hängt von der max. Belastung des Ankers und damit von der Setztiefe ab. Zuverlässige Problemlösung und einfache Handhabung Geprüft von der Universität Dortmund – Institut für Bauforschung Zugelassen für den temporären Einsatz von sechs Monaten und Betonfestigkeiten von min. C 20/25 oder B 25, ungerissen und gerissen Werkstoff: Weißer Temperguss (Lamellen: EN-GJMW-400-5, Konus: EN-GJMW-450-7) Max. Zugkraft NRk,s= 158 kN

Customers also bought

Spacer tubes with a roughened surface

Grooved cone (VIBADISTANZ) Ø 22 mm

Grooved cone (Vibadistant) Ø 22 mm

Ripped drawb netak Lochripp

Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork

Faserbeton-Klötze Knochen

Made of fibre concrete for horizontal and vertical reinforcement.

Kunststoff-Futterrohr WELLO mit Quellband

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.