Skip to main content Skip to search Skip to main navigation
Downloads "Grooved cone (VIBADISTANZ) Ø 22 mm"
Skip product gallery

Zubehör

Plugs Vibadistanz Ø 22 mm
Material HDPE. Appropriate for tubes with an outer diameter of 22 mm
Skip product gallery

Ähnliche Artikel

Pressure cone Standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Pressure cones (PVC-free) with glued sealing
Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.
Skip product gallery

Customers also viewed

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Plugs Vibadistanz Ø 22 mm
Material HDPE. Appropriate for tubes with an outer diameter of 22 mm
Plugs unruffeld
Plastic plugs (colour gray) to close the spredaer after form removal.  
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Rebar spacers with sidewise recesses
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.
Rebar spacers with sidewise recesses
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.
Skip product gallery

Customers also bought

Rebar spacers with sidewise recesses
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.
Gliederketten Element Link-Seal C verzinkt
Standard chains - stock items Type C: EPDM rubber (black standard), galvanized screws The link chain required can be easily selected using the size chart.Depending on the dimension, a different number of links of the respective type are put together to form a chain. The following versions on request: Type BC: EPDM rubber (blue, extra soft for plastic pipes), galvanized screws Type S316: EPDM rubber (black), screws V4A stainless steel Type BS316: EPDM rubber (blue, extra soft for plastic pipe), screws V4A stainless steel Type O: rubber nitrile (green, oil-resistant), galvanized screws. Type OS316: rubber nitrile (green, oil-resistant), screws V4A stainless steel.
Protection cap for reinforced bars
Protection cap made of plastic for accident preventation. Attention! No penetration safety!
Drill (automatic)
Material chrome vanadium steelColor: Black