Skip to main content Skip to search Skip to main navigation
Skip product gallery

Zubehör

Gun cleaner 500 ml
The PU foam cleaner is a highly active cold cleaner for rinsing PU foam guns and removing fresh PU foam contamination.   Field of use: PU foam cleaner was specially developed for removing fresh PU foam residues and for cleaning PU foam guns after use.
Skip product gallery

Customers also viewed

Formwork stop round with nail
For fixing the formwork in the lower area. PVC formwork stop with nail: With pre-assembled steel nail for quick assembly. Suitable for standard nail guns.
Gun well foam 750 ml
Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with moisture from the air and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections
PAE-Construction foil
Other widths and strengths on request. Rated strength less usual tolerance.
Noppenfolie T8
Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.
Formwork stop GFK conrete grey
Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins. 
Protective mats Super (frost protection)
The protective mats SUPER is bothsided coated with a white layer (Summer side) and a black layer (Winter side) Scope of application: Frost protection for Winter (enables concrete work to -5 Degree C without hardness decrease) Evaporation protection Protective covering Heat insulation
HB-Connector P - galv.
to connect and safe the wood-concrete slab edge shuttering, also VIBA - shuttering board HB,  on the reinforcement.  Material: galvanized Length: 80 mm Packaging: 100 pieces per bag
PAE-Construction foil
Other widths and strengths on request. Rated strength less usual tolerance.
Surface spacer Snake without nubs
Made of fibre concrete for horizontal mats- and round-bar steel reinforcement.  
Betontrennmittel Viba-Trenn Bio FU Pflanzenöl
VIBA-Trenn Bio Schalöl FU ist ein auf pflanzlicher Basis und synthetischen Ester-Komponenten aus Pflanzenölen hergestelltes Betontrennmittel, das sowohl für saugende als auch für nichtsaugende Schalungen, z.B. aus Holz, Kunststoff, Stahl sowie zur Beton/Beton-Trennung in der Betonstein- und Fertigteilindustrie bestens geeignet ist. Es garantiert leichtes und sauberes Entschalen sowie glatte Oberflächen mit scharf profilierten Kanten. Aufgrund seiner Zusammensetzung ist das Produkt als ökologisch wertvoll einzustufen, da es ein beschleunigtes biologisches Abbauverhalten aufweist und als unschädlich für Mensch, Tier und Umwelt gilt. Eigenschaften: Einsatzbereich bis 100°C (Schalungstemperatur). frei von Wachsen, Paraffinen und Silikonen. umweltfreundliche und biologisch abbaubar. Enthält Zusätze gegen Oxidation und Korrosion.