Boarding for steps
Customers also viewed
Three layer plywood weather-resistant glued Surface with melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Handgerät für die einfache Reinigung von Kanten von Schaltafel von 12 - 27 mm.
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
Type 1: 21 pieces telescope tubes 92 - 144 cm Type 2: 6 pieces telescope tubes 107 - 167 cm
Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with humidity and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections
Concrete formwork mounting set including: 1 x Tensile belts length 4,0 m 2 x Threaded subplate Ø 15 mm, 2 x Wing nuts Ø 15 mm
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails. Processing instructions in the download tab. Tolerance range length and width +/- 2.0 mm
Abstandhalter für Schienen System mit Noppen. Mit aufgesteckten Kunststoffelementen für Sichtbeton Oberflächen.
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.