Properties

Ausführung:	Mod. 053 - Abm. 4.000 x 1.210mm

Strukturmatten / Matrizen für Betonwand

Product number: 45N053

Ausführung

Mod. 005 - Abm 4 000 x 1.300mm

Mod. 053 - Abm. 4.000 x 1.210mm

Mod. 051 - Abm. 4.000 x 1.220mm

Stk

Description

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails.

Processing instructions in the download tab.

Tolerance range length and width +/- 2.0 mm

Properties

Ausführung:	Mod. 053 - Abm. 4.000 x 1.210mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Ausführung
45N005	Strukturmatten / Matrizen für Betonwand	Mod. 005 - Abm 4 000 x 1.300mm
45N051	Strukturmatten / Matrizen für Betonwand	Mod. 051 - Abm. 4.000 x 1.220mm
45N053	Strukturmatten / Matrizen für Betonwand	Mod. 053 - Abm. 4.000 x 1.210mm

Product Nr. : 45N005

Strukturmatten / Matrizen für Betonwand

Price

Ausführung: Mod. 005 - Abm 4 000 x 1.300mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 45N051

Strukturmatten / Matrizen für Betonwand

Price

Ausführung: Mod. 051 - Abm. 4.000 x 1.220mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 45N053

Strukturmatten / Matrizen für Betonwand

Price

Ausführung: Mod. 053 - Abm. 4.000 x 1.210mm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Strukturmatten / Matrizen für Betonwand

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails. Processing instructions in the download tab. Tolerance range length and width +/- 2.0 mm

Strukturmatten / Matrizen für Betonwand

Rebar spacers made of PE

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Construction water bar inside

Vitzthum-water bars made of soft PVC bribe through many good features and high profitability. The water bars are resistant against acid, alkali and putrefaction. Variety overview: Typ a b c f 61A080 80 - - - 61A100 100 40 3,0 10 61A120 120 45 3,0 10 61A200 200 70 3,0 15 61A250 240 80 3,5 15 61A300 320 110 4,5 15 Bitumen-resistant variety on request!

Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30

Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN

Formwork stop GFK conrete grey

Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins.

VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm

Horizontal frame-elements for formworks of fundaments. Anchoring:On top with anchor rod Ø 15,0 mm and "super" nut.On base with VIBA-foundation tensioner and VIBA-punched steel strip.Wall thicknesses within a 5 cm grid can be produced. Load:punched steel strip max. 12 kNpunched steel strip length = wall thickness + 50 cm

Mauerverbinder Typ 2

Wall connector for bricks- and stone wall. Other strengths and design on request.

Distanzstreifen AB 30

The distance stripes are situated between the upper and lower reinforcement panel as well as between the external and internal reinforcement wall. They don t sit on the formwork (no plastic feet) therefore, a proper exposed concrete can be arised. Packing units: big band at 1.000 pcs., band at 200 pcs., small band at 25 pcs.

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.