Properties

Ausführung:	Mod. 053 - Abm. 4.000 x 1.210mm

Strukturmatten / Matrizen für Betonwand

Product number: 45N053

Ausführung

Mod. 005 - Abm 4 000 x 1.300mm

Mod. 053 - Abm. 4.000 x 1.210mm

Mod. 051 - Abm. 4.000 x 1.220mm

Stk

Description

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails.

Processing instructions in the download tab.

Tolerance range length and width +/- 2.0 mm

Properties

Ausführung:	Mod. 053 - Abm. 4.000 x 1.210mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Ausführung
45N005	Strukturmatten / Matrizen für Betonwand	Mod. 005 - Abm 4 000 x 1.300mm
45N051	Strukturmatten / Matrizen für Betonwand	Mod. 051 - Abm. 4.000 x 1.220mm
45N053	Strukturmatten / Matrizen für Betonwand	Mod. 053 - Abm. 4.000 x 1.210mm

Product Nr. : 45N005

Strukturmatten / Matrizen für Betonwand

Price

Ausführung: Mod. 005 - Abm 4 000 x 1.300mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 45N051

Strukturmatten / Matrizen für Betonwand

Price

Ausführung: Mod. 051 - Abm. 4.000 x 1.220mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 45N053

Strukturmatten / Matrizen für Betonwand

Price

Ausführung: Mod. 053 - Abm. 4.000 x 1.210mm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Strukturmatten / Matrizen für Betonwand

Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails. Processing instructions in the download tab. Tolerance range length and width +/- 2.0 mm

Strukturmatten / Matrizen für Betonwand

VIBA Plex F Formwork Board 10

The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable

Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30

Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN

Formwork stop GFK conrete grey

Formwork stop made of fibreglass. Pins Ø: 10 mm; Length: 100 mm ADVANTAGES: Non-corrosive High strength and stable Chemical resistance Fast and easy installation INSTALLATION: Mark the position of the formwork with a snap line. Drill periodically holes with a diameter of 10mm along the marking. ATTENTION: Please consider the length of the pins.

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm

Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug

VIBA - Rebar connection (Double row) type M

Metal box with rough surface.The surface polishing ensures a good connection with concrete and supports the transfer of shear forces. Rebendable structural steel BST550 with Austrian certificate. (BST 500 on request) Technical data: Standard - Elementlength 125 cm.Box heigth h1 = 3 cm; Other types on request. By Special types just fill the attached datasheet and send it to us per mail or fax.

Formwork stop round with nail

For fixing the formwork in the lower area. PVC formwork stop with nail: With pre-assembled steel nail for quick assembly. Suitable for standard nail guns.

Rebar spacers made of PE

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Gliederketten Element Link-Seal C verzinkt

Standard chains - stock items Type C: EPDM rubber (black standard), galvanized screws The link chain required can be easily selected using the size chart.Depending on the dimension, a different number of links of the respective type are put together to form a chain. The following versions on request: Type BC: EPDM rubber (blue, extra soft for plastic pipes), galvanized screws Type S316: EPDM rubber (black), screws V4A stainless steel Type BS316: EPDM rubber (blue, extra soft for plastic pipe), screws V4A stainless steel Type O: rubber nitrile (green, oil-resistant), galvanized screws. Type OS316: rubber nitrile (green, oil-resistant), screws V4A stainless steel.