Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Länge in cm
Price
Action
11B100
Schalungsbinder SAM 2
100 cm
11B25
Schalungsbinder SAM 2
25 cm
11B
Schalungsbinder SAM 2
50 cm
Skip product gallery

Zubehör

SAM-Pull hammer
to pull out the spacer-end after stripping the formwork. Suitable for normal concrete and exposed concrete.
SAM-Pull out lever
Pull out lever to remove the end of spacer after stripping the formwork. Suitable for normal and exposed concrete.
SAM-spacer normal
Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.
End wedge SAM 1
End wedge SAM 1. to mount the lowest spacer ( in rear hole. in front hole mount binder) also to secure upper binders.
SAM-Abstandhalter; Sicht aufg.
Abstandhalter System SAM für Sichtbeton (Sichtbeton Qualität) In Kombination mit 27mm Standard Schaltafeln, schnell und einfach anwendbar. Verpackungseinheiten:bis Wandstärke 30 cm 100 Stk. / Kartonab Wandstärke 35 cm 50 Stk. / Karton Das SAM Schalungssystem ermöglicht ein unkompliziertes und sparsames Schalen von Betonmauern. Alle Sonderlängen (in cm Abstufungen) möglich.
Skip product gallery

Customers also viewed

Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
End wedge SAM 1
End wedge SAM 1. to mount the lowest spacer ( in rear hole. in front hole mount binder) also to secure upper binders.
Tie rod extractor Ø 15/20 galv.
Version: galvanized.Suitable for anchor rods Ø 15 and 20 mm.
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm
Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring Pipe area Plug Ø 25 - 28 mm Nr. 1 Ø 32 mm Nr. 2 Ø 40 mm Nr. 3 Ø 50 mm Nr. 4 Ø 63 mm
SAM-Pull out lever
Pull out lever to remove the end of spacer after stripping the formwork. Suitable for normal and exposed concrete.
SAM-spacer normal
Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.
SAM-spacer normal
Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.
SAM-calibrating crank
to break off the end of the spacers after stripping the formwork. !not suitable for exposed concrete!
SAM-Pull hammer
to pull out the spacer-end after stripping the formwork. Suitable for normal concrete and exposed concrete.
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Skip product gallery

Customers also bought

Tie rod extractor Ø 15/20 galv.
Version: galvanized.Suitable for anchor rods Ø 15 and 20 mm.
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm
Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring Pipe area Plug Ø 25 - 28 mm Nr. 1 Ø 32 mm Nr. 2 Ø 40 mm Nr. 3 Ø 50 mm Nr. 4 Ø 63 mm
Earthing round wire galvanized / stainless steel
Available in the following versions: Stainless steel. galvanized Further dimensions on request.
SAM-spacer normal
Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.
Ankerstab Ø 15,0 mm (90 kN) schwarz
Hot-rolled steel. Self-cleaning D&W Twin-rib threaded steel. Standard length: 6m Other lengths on request