Skip to main content Skip to search Skip to main navigation
Skip product gallery

Customers also viewed

SAM-Pull out lever
Pull out lever to remove the end of spacer after stripping the formwork. Suitable for normal and exposed concrete.
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
SAM spacers; Exposed concrete already attached
Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / boxFrom a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.
SAM-calibrating crank
to break off the end of the spacers after stripping the formwork. !not suitable for exposed concrete!
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
H-extensions
To mount at the undermost formwork panel if worked with joint tape.
End wedge SAM 1
End wedge SAM 1. to mount the lowest spacer ( in rear hole. in front hole mount binder) also to secure upper binders.
SAM-exposed concrete element
 Put the exposed concrete element on the spacer to get a clean exposed concrete surface after stripping the formwork.
SAM-Plastic taper locks
Plastic Taper locks after removing the spacer the wedge closes the exposed concrete element. The result is an attractive exposed concrete surface.