SAM-Pull out lever
Description
Pull out lever to remove the end of spacer after stripping the formwork.
Suitable for normal and exposed concrete.
Customers also viewed
to pull out the spacer-end after stripping the formwork. Suitable for normal concrete and exposed concrete.
Simple support for the base plate stripping Because of its expanded earth spike also applicable for soft grounds.
Abstandhalter für Schienen System mit Noppen. Mit aufgesteckten Kunststoffelementen für Sichtbeton Oberflächen.
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
End wedge SAM 1. to mount the lowest spacer ( in rear hole. in front hole mount binder) also to secure upper binders.
To mount at the undermost formwork panel if worked with joint tape.
to break off the end of the spacers after stripping the formwork. !not suitable for exposed concrete!
Concrete formwork mounting set including: 1 x Tensile belts length 4,0 m 2 x Threaded subplate Ø 15 mm, 2 x Wing nuts Ø 15 mm
Structure: cross-banded construction Gluing: cook and weather-resistant Surface: phenolic coating Edge sealed Silkscreen printing
Die ZBV 500-S ist eine höhen- und schrägverstellbare Baustellen-Tischkreissäge mit 500 mm großem Sägeblatt. Mit der ZBV 500-S werden auch Schrägschnitte mit hoher Schnitthöhe auf der Baustelle möglich. Vor allem das immer mehr verwendete Dämmmaterial kann so optimal in Verbindung mit dem Spezial-Kreissägeblatt bearbeitet werden. Sonderzubehör: Fahrvorrichtung, Tischverbreiterung, Absaugvorrichtung, Schmiegenlehre zum Anfassen und zur Dreikantprofilherstellung