Kantenreiniger für Schalungsplatten

Handgerät für die einfache Reinigung von H20-Schalungsträger Kanten.

Clean, save and extend the life time of formwork plywood, planks, etc. The machine cleans and oilis the surface and longitudinal edges of formwork plywood. Tech. Data: Engine: 0,86 kW 400 V 50HZ Mould oil pump: 0,11 kW 400 V 50HZ (with extra switch) Total length: 2815 mm Total width: 880 mm Total height: 1196 mm Weight: 298 kg Max. Work height: 60-500 mm Max. Run power:  15-32 mm                                                                                                                                                         

Handgerät für die einfache Reinigung von H20-Schalungsträger Kanten.

Carbide tipped saw band: Excellent for cutting abrasive materials e.g.: aerated concrete, Ytong, aerated concrete. For use in the construction industry.

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.

The machine SR 1000 is a robust stone cutting machine for wet cutting. Provided with a diamond dividing disc it is used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction.   Technical data: engine:                 7,5 kW 400 V 50 HZ<?xml:namespace prefix = "o" /> water pump:        TB 16 0.07 kW 400 V 50 HZ dividing disc:       Ø 900 or 1000 mm Bo 60 mm cut depth:             max. 365/420 mm cut height:            650 mm feed:                     automatic with handrail Dimension: overall length       1150 mm overall width         860 mm overall height       2000 mm weight                   415 kg

PVC- free spacers for vertical reinforcement.  

Verzinkte patentierte Betonschraube mit Sechskant und Flansch ETA-15/0784 und 15/0785 Zulassung- Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung) Neuer Schraubenkopf: Sechskantkopf mit angepresster Scheibe Kopfprägung MMS+ Erhöhung des Gewindeaußendurchmessers: Größere hinterschnittene Fläche durch das Gewinde im Beton Optimierte Tragfähigkeit im Beton Überarbeitete Funktionsspitze: Stärkere Verzahnung und größerer Außendurchmesser der Spitze Größerer Hinterschnitt Geringeres Verschleißverhalten der Funktionsspitze Weniger Verschleiß beim Einschrauben Hoher Montagekomfort – geringe Montagedrehmomente Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.

Vitzthum-water bars made of soft PVC bribe through many good  features and high profitability. The water bars are resistant against acid, alkali and putrefaction. Variety overview: Typ a b c f 61A080 80 - - - 61A100 100 40 3,0 10 61A120 120 45 3,0 10 61A200 200 70 3,0 15 61A250 240 80 3,5 15 61A300 320 110 4,5 15                     Bitumen-resistant variety on request!

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible