Diem- concrete mixer tilting drum type Allround D 120C
Product number:
57DA120C
Skip product gallery
Customers also viewed
WC - Box Water galvanized
Equipment:
1 x Flushing cistern (for channel interface)
1 x Paper holder
1 x Towel rack
1 x Coat hook
1 x Mirror
1 x Washbasin with soap placer connection possibility
Cold water with sewage disposal
External dimension:1,18 x 1,18 m, Height 2,40 m
Structure:Frame structure (floor, corners and roof) made of galvanized and painted sheet steel profiles, light grey (white RAL 9002)
Other structuring or equipment possible (e.g. heating unit) on request.
External sealing ActiveRing
The ActiveRing mini and maxi allow a safe and lasting sealing for fibre conrete- and plastic tubes.
Easy and safe
Sealing test MFPA Leipzig
Good chemical resistance´
Waterproofing up to 8 bar
Log in to see more information
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably!
Material: HDPE
Log in to see more information
Plywood panels SMOOTH
The both sided coat gives these panels high resistance against weather, liquids, etc.
Structure: cross-banded construction
Gluing: cook and weather-resistant
Surface: phenolic coating
edge sealed
other forms and thicknesses on request
Construction site door
Burglars often have an easy job on unprotected construction sites. The biggerand the more complex the objects, the easier it is to break. Vandalism in the shelland construction phase often leads to considerable damage and additionalcosts and time delays. There is effective protection against such damage. It isinexpensive and can be installed in a few minutes: the construction site door with the unique quick spindle adjustment!Robust, durable and maintenance-free.
For more security in the shell and construction phase
Door sizes (OVL and OVL-SI)Building dimensions: width 860 to 1180 mm, height 1980 to 2192 mmClear passage width 750 mm, height 1930 mm
Door elementReady-to-install, single-leaf door elements for multiple use(portable).
Door leafDouble-walled, sheet thickness 40 mm thick, rebated on 3 sides (thick rebate) withclose-meshed honeycomb inlay that is glued over the entire surface to door shells.
FramesSheet steel, 1.5 mm thick, with stabilizing beading.Lower fastening through anchoring holes, which make it easyEnsure installation and removal. An optional seal ensures quiet closing.
surfaceOptimal corrosion protection for door leaves, frames, hinges and spindles thanks to galvanized material.
Fuse2 lever-proof hinges and 1 solid safety bolt on the hinge side.
Handle setPlastic round handle set black with steel core.
Castle (OVL)Security lock with profile half cylinder, 3 keys.
Equipment pluses of the OVL-Si:Door leaf and frame with additional steel reinforcementSecurity: 2 additional security elements on the lock side.Lock: Flush profile cylinder, drilling and pulling protected, 3 keys
Steinadler AR 1500
Ideal for the nature and cast stone treatment. Cut-exact precise guidance due to the extremely stable construction. The model AR is by default equipped with feather height adjustment. On request a spindle high adjustment is also manufactured.
Machine lacquered / water tub hot galvanized, table support electrolytically galvanized, guide rails electrolytically galvanized, cutting support with prisms rolls guidance, long notice 0 - 500 mm, 500 - 1000 mm, feed with chain and handwheel transmission (2 speeds)Accessories: lateral roller table with stop, lateral bearing with stop.
Diem-concrete mixer tilting drum type Allround D 100C
Ahead of its time with the latest compact generation. Professionals use this concrete mixer
Convenient operationThe most important operating elements such as toggle levers and switches are arranged in a user-friendly manner.
Optimal size of the flanged drum openingExcellent accessibility and practical drainage of the concrete.
Light and power connection innovatively combined in one machinePromises versatility on every construction site - 230V and 400V!
Tried and tested chassisThe mobility on construction site terrain is guaranteed.
The specially designed concrete mixer guarantees excellent mixing results. The tilting mixers drum type of the compact generation are extremely robust and maintenance-free, perfectly suited for daily construction site operations.
Technical specifications:
D 100C ALLROUND
Motor
230/400V 0,75 KW
Transmission
27 ¹ / min
Capacity
160 l
Mixing quantity
100 l
Total height
1490 mm
Total width
900 mm
Total length
1350 mm
Drum diameter
643 mm
Drum height
576 mm
Tilt gear
-
Weigth
101 kg
Varnishing
RAL 1013
Set of tiers
Solid rubber
Rebar spacer CLOSED
Spacing strip to use on soft underground.
Mill length: 200 cm.
Other lenghts available. (PVC - free by request)
Log in to see more information
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance.
Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs.
Typical applications include:
Sealing and bonding in concrete construction for interior and exterior use
Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces
Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5)
Crack-bridging sealant up to 50 m water column
Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum
Well suited for bonding construction foils and membranes
Suitable for sealing and bonding applications requiring silicone-free systems on site
Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets.
Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE.
Product features and advantages:
Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum
Elastic
Non-corrosive
Neutral odor
Weathering and aging resistant
Good UV resistance
Virtually no shrinkage
No bubble formation
Paint-compatible
Log in to see more information
