Properties
| Ausführung: | verzinkt |
|---|
Safety rail for elevator shaft
Product number:
310
Properties
| Ausführung: | verzinkt |
|---|
Skip product gallery
Customers also viewed
Suspension shoe for squared timber 100/100
Fits for squared timber 10 x 10 cm, for stacks and intermediate platforms.
Log in to see more information
Railing holder type H
Stabile version from forming tube, outside 40 x 40 mm, inside 35 x 35 mm.
Easy adjustment by dint of inlying threaded spindle (Dywidag-spindle 15 mm)
High security.
Simple assembly.
Railing holder type S
Railing holder type S is screwed into the concreted anchor case or the corner adapter, e.g. in balcony plates, bridge cornices, ceiling edges, cantilever plates...All board holders are swivelling around 360°.The corner adapter is screwed laterally into the anchor case and is fixed with the anchor tie groove to the construction unit.Ideal for stair cheeks or cantilever plates in those a fastening of the railing is only laterally possible.
VIBA-Proofflex – Premium Waterstop Strip F 150 mm with Mounting Flange
Double-sided fully coated, pressure-resistant waterstop element for construction joint sealing. The pressure-sensitive, fresh-concrete bonding coating with an enlarged surface area forms an exceptionally strong bond with the concrete and remains permanently active. A bentonite sealing strip is integrated at the overlap joint.
Applications
VIBA-Proofflex Premium is designed for the internal sealing of construction joints (maximum joint opening up to 0.25 mm) and controlled crack joints (maximum joint opening up to 1.0 mm) in reinforced concrete structures with high resistance to water penetration against:
Ground moisture and non-pressurized water Pressurized water Areas subject to alternating water levels
The sealing system complies with the requirements of Utilization Class A for Exposure Classes 1 and 2 in accordance with the German WU Guideline (Water-Impermeable Concrete Structures).
Log in to see more information
Faulenzer (special props)
Perpendicular and angle setting
Infinite adjustment with integrated spring base part
Can be clamped between ground and ceiling
Adjustment of the levels possible in varaible heights by sliding eyelets
With synthetic cap on the upper end
From profiled pipe inside 35 x 35, outer 40 x 40 mm
Diamanttrennscheiben für Winkelschleifer
Disc diameter: 230 mm
Bore: 22.2 mm
Available in three different degrees of hardness
Diamanttrennscheiben für Winkelschleifer
Disc diameter: 230 mm
Bore: 22.2 mm
Available in three different degrees of hardness
Barelle für Deckenstützen
These barelles are especially suitable for the efficient transport and storage of ceiling props.
Suitable for crane and forklift operation (4 crane hooks on the side).
Easy stacking because of the Conical bell feet
Made from steel tubes with a diameter of 48 mm.
Dimensions L W H are clear dimensions
Ankerhülse Alu mit PVC - Haltestopfen und Doppelkopfnagel
With internal thread for Ø 15 mm Dywidag tension rod.Perfect use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc.
Permissible load: 28 kN.
Log in to see more information
