De-icing chemical SNO-N-ICE

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.

Auftausalz 0-3

Streumittel im Straßenwinterdienst, gemäß den Anforderungen der TLStreu (Steinsalz). Ihre Vorteile: Tauwirksame Substanz ca. 99,0% Großteil der Körner zw. 0,4 und 2 mm Mit Feinanteilen, die schnell wirken Mit Grobanteilen (bis 3 mm), die anhaltend wirken (Langzeitwirkung) Klumpt nicht! Natursalz Entspricht der RVS

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Collecting tray 210 lt

210-liter painted spill tray with galvanized steel grating.

Evaporation protection Antisol - E

Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Release agent for exposed concrete – Ricon emulsion based on plant-based oils

Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity. Properties: Based on renewable raw materials Excellent release performance For visually high-quality and light-colored concrete surfaces Solvent-free and mineral oil-free Low odor Ready to use Easy to spra

Exposed concrete plugs for pressure cone

The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.

De-icing chemical SNO-N-ICE

Description