Properties

Gewicht / Stk:	285 kg
L/W/H:	62 x 75 x 90 cm

Rebar Bending Machine P34 Evo, 400 V, Programmable

Product number: 56B020

Stk

Description

Rebar Bending Machine up to max. Ø 30 mm (R55). Bending capacity approx. 11 bends/min at R55. The machine can be programmed for up to 6 bends.Angle adjustment is carried out using pins.

Standard Equipment:
1 hardened square pin
1 hardened stirrup bending pin
3 hardened bushing retaining pins
1 side plate
1 foot pedal control
5 bushings Ø 50–60–70–80–95 mm
1 set of hex keys (Allen keys)

Steel Qty.	SteelR55 Ø mm
1	30
2	22
3	18
5	10

Properties

Gewicht / Stk:	285 kg
L/W/H:	62 x 75 x 90 cm

Customers also viewed

VIBA-MG20B tragbare Biegemaschine, 220V, incl. Zubehör

MAX Rebar Tying Tool - RB 443T Ø 20mm - 44 mm

MAX Rebar Trying Tool - RB 443T Ø 20 - 44 mm. The new generation of Re-Bar tying machine up to 20mm x 25mm with 1.0 mm wire. Advantages: 0.5 sec/tie which is 30% faster than RB441T. 5000 ties per charge 65 minutes full charge (50 minutes 80%) Scope of delivery: Battery JPL91450A ( 2 pcs.) Charging station JC925A Plastic case Applications: Precast Plants Foundations Road and Bridge Floor decking Floor heating Building floor

Dreikant-Profilstäbe 20 mm konkav

Rod spacer made of fibre reinforced concrete.Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).

Dreikant- Profilstäbe 25 mm konkav

Rod spacer made of fibre reinforced concrete.Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).

Band saw UVB Z 500 S

Save time and effort at the building: with the band saw UVB Z 500 S for cutting gas-aereated concrete blocks and expanded clay - easy, quick and precise. The quick pay-back time makes it a profitable investment! Advantages: Torsionally rigid body. Practical transport position. Precise saw blade guidance. Saw table made of aluminium. Vulcanised rubber lining. Automatic limit stop. Quick changing of saw blade (also suitable for wood). On request with optional dust vacuum.

Baustahl Schneidegerät C38 EVO

Das Baustahlschneidegerät C38 Evo kann bis max. Ø 30mm schneiden. Sie überzeugt mit zwei gehärteten Stahlklingen, welche jeweils mit vier Schneidekanten, bereits auf der Maschine montiert sind. Eine Einstellschraube ermöglicht die perfekte Ausrichtung für Rundeisen im Schneidbereich.

Vierbein aus Draht mit Kunststoff-Fuß GF 45 mm

Extremely stable support for the top layer of reinforcement. Corrosion inihibitor Hardwearing, big mats-constraint Conforms the DBV-handout support Also availalbe with 1 or 2 crossbars

SAM spacers; Exposed concrete already attached

Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / boxFrom a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.

Positionsschilder blau mit Aufdruck

Flächenabstandhalter Dreikant-Profilstäbe Konkav mit Drähten

Made of fibre concrete for horizontal mats- and round-bar steel reinforcement, easy execution with continuos threads. The flat surface below by horizontal shift.