Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery
Three-layer plate Standard, thick: 27 mm

Properties

Abmessung in cm: 50 x 100 cm
Länge in cm: 100 cm
Stärke in mm: 27 mm

Three-layer plate Standard, thick: 27 mm

Product number: 42A100
Abmessung in cm
Quadratmeter
m²

Description

Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Properties

Abmessung in cm: 50 x 100 cm
Länge in cm: 100 cm
Stärke in mm: 27 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
42A100
 Three-layer plate Standard, thick: 27 mm
50 x 100 cm
42A150
 Three-layer plate Standard, thick: 27 mm
50 x 150 cm
42A200
 Three-layer plate Standard, thick: 27 mm
50 x 200 cm
42A250
 Three-layer plate Standard, thick: 27 mm
50 x 250 cm
42A300
 Three-layer plate Standard, thick: 27 mm
50 x 300 cm
42A350
 Three-layer plate Standard, thick: 27 mm
50 x 350 cm
42A400
 Three-layer plate Standard, thick: 27 mm
50 x 400 cm
42A450
 Three-layer plate Standard, thick: 27 mm
50 x 450 cm
42A500
 Three-layer plate Standard, thick: 27 mm
50 x 500 cm
42A600
 Three-layer plate Standard, thick: 27 mm
50 x 600 cm
Skip product gallery

Zubehör

Formwork plugs 22-25mm

Formwork plugs: Seals holes in the formwork Ø 22 to Ø 25 mm.    

Skip product gallery

Customers also viewed

Three-layer plate Standard, thick: 27 mm

Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Holz-Schalungsträger H20

Long lifetime through high quality gluing Protection against damages through special beam end version Low weight Packaging: 50 / 100 pcs Dimension stable Other lengths on request

Mounting plate

Mounting plates 70 x 70 mm without slot Mounting plates with slot on request

Deckenstützen Euro (DC) nach EN 1065

All versions with failure protection, accident proof. Props in different sizes and versions.Failure loads tested according to EN 1065. Produced and tested according to EN 1065, with covered thread (DC). With failure protection and accident proof. Threaded socket with additional bearing ring (slide ring). Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Three-layer plate Standard, thick: 27 mm

Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm.  Other lengths on request.

Glue for swelling tapes

Swelling tape glue for Betonite- and EPDM swelling tapes cartridge 310 ml; consumption: 1 cart./8 m  

Three-layer plate Standard, thick: 27 mm

Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

SAM spacers; Exposed concrete already attached

Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / boxFrom a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.

This website uses cookies to ensure the best experience possible. More information...