Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Abmessung in cm: 50 x 250 cm
Länge in cm: 250 cm
Stärke in mm: 27 mm

Three-layer plate Standard, thick: 27 mm

Product number: 42A250
Abmessung in cm
Quadratmeter
m²

Description

Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Properties

Abmessung in cm: 50 x 250 cm
Länge in cm: 250 cm
Stärke in mm: 27 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
42A100
 Three-layer plate Standard, thick: 27 mm
50 x 100 cm
42A150
 Three-layer plate Standard, thick: 27 mm
50 x 150 cm
42A200
 Three-layer plate Standard, thick: 27 mm
50 x 200 cm
42A250
 Three-layer plate Standard, thick: 27 mm
50 x 250 cm
42A300
 Three-layer plate Standard, thick: 27 mm
50 x 300 cm
42A350
 Three-layer plate Standard, thick: 27 mm
50 x 350 cm
42A400
 Three-layer plate Standard, thick: 27 mm
50 x 400 cm
42A450
 Three-layer plate Standard, thick: 27 mm
50 x 450 cm
42A500
 Three-layer plate Standard, thick: 27 mm
50 x 500 cm
42A600
 Three-layer plate Standard, thick: 27 mm
50 x 600 cm
Skip product gallery

Zubehör

Formwork plugs 22-25mm
Formwork plugs 22-25mm
Formwork plugs: Seals holes in the formwork Ø 22 to Ø 25 mm.    
Skip product gallery

Customers also viewed

Three-layer plate Standard, thick: 27 mm
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Three-layer plate Standard, thick: 27 mm
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Three-layer plate, width 1m
Three-layer plate, width 1m
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!  
Three-layer plate Standard, thick: 27 mm
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Three-layer plate Standard, thick: 27 mm
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
This website uses cookies to ensure the best experience possible. More information...