Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Skip product gallery

Zubehör

Formwork plugs 22-25mm
Formwork plugs: Seals holes in the formwork Ø 22 to Ø 25 mm.    
Skip product gallery

Customers also viewed

Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Three-layer plate, width 1m
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!  
Rundfix (PVC-free)
PVC- free spacers for vertical reinforcement.  
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Rundfix (PVC-free)
PVC- free spacers for vertical reinforcement.  
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Tie rod extractor Ø 15/20 galv.
Version: galvanized.Suitable for anchor rods Ø 15 and 20 mm.
Concrete vibrator type INTEG
INTEG Vibrators are very compact. A separat converter is not necessary. They use very little current, only max. 8A.Easy handling, instant use and small transport space make them ideal for many jobs. Converter 1,5 KVA Weight only 2,5 Kg Needs very little current Waterprof Dimensions 32 x 10 x 9 cm Top quality vibration-needle Three bearings in the needle  
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps