Properties
| Breite: | 880 mm |
|---|---|
| Engine: | 0,86 kW 400 V 50HZ |
| Höhe: | 1196 mm |
| length m: | 2815 mm |
Formwork plywood cleaner model LA - PA vertical
Properties
| Breite: | 880 mm |
|---|---|
| Engine: | 0,86 kW 400 V 50HZ |
| Höhe: | 1196 mm |
| length m: | 2815 mm |
Customers also viewed
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m
to break off the end of the spacers after stripping the formwork. !not suitable for exposed concrete!
EXPANSION TAPE SK is a self-adhesive bentonite expansion tape which expands in contact with water and prevents water intrusion.In contact with water the tapes swell and seal the joint permanently. Test certificates: Tested by the university tBU Greven up to 50 m water column Approved for the usage in contact with drinking waterApplication: Waterproofed integration of pipings into concrete buildings. Sealing of reinforcement connections. Sealing of floor drains. Installation: Remove silicone paper and stick two rings of EXPANSION TAPE SK around the pipe, which has to be sealed. Butt against the joint ends, no overlaps. The surface of the pipes has to be hard. EXPANSION TAPE SK adheres to metal, plastic, PVC and stone. If necessary secure EXPANSION TAPE SK by using a binding wire.
Das Bentonit Quellband "Long Time" folienbeschichtet. Abmessung 20 x 5 mm, schwarz, auf 5 Bar geprüft. Durch das Aufquellen und den beim Quellvorgang entstehenden Quelldruck wird ein Eindringen des Wassers verhindert. Das Bentonitquellband ist eine in Wasser quellfähige Dichtung. Es besteht aus fein vermahlenem, hochquellfähigem Tonmineral (Natrium-Bentonit), eingebettet, als Bindemittel, in eine Matrix aus nicht vulkanisiertem Kautschuk. Zur besseren Witterungsbeständigkeit ist es mit einer sich im Beton selbstauflösenden Folie umhüllt. Achtung! Quellband nicht direkt nageln, nicht kleben - Befestigung nur mit Gitter! Verarbeitung siehe Datenblatt!
Material: Wood concrete slab Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the concrete easy mounting through screws or nails (light nailing) Time saving Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm Fixing strips is made of the same material as VIBA shuttering board
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
Horizontal frame-elements for formworks of fundaments. Anchoring:On top with anchor rod Ø 15,0 mm and "super" nut.On base with VIBA-foundation tensioner and VIBA-punched steel strip.Wall thicknesses within a 5 cm grid can be produced. Load:punched steel strip max. 12 kNpunched steel strip length = wall thickness + 50 cm