Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Innen ø in mm: 30 mm

Tubes for cut outs

Product number: 26D0030
Innen ø in mm

Price on request

m

Description

Material: Steel blank, optional steel galv. Special materials on request.

Standardlength 3 m, other lengths on request.

Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

 

Properties

Innen ø in mm: 30 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Innen ø in mm
Price
Action
26D0030
 Tubes for cut outs
30 mm
26D0040
 Tubes for cut outs
40 mm
26D0050
 Tubes for cut outs
50 mm
26D0055
 Tubes for cut outs
55 mm
26D0060
 Tubes for cut outs
60 mm
26D0065
 Tubes for cut outs
65 mm
26D0070
 Tubes for cut outs
70 mm
26D0075
 Tubes for cut outs
75 mm
26D0080
 Tubes for cut outs
80 mm
26D0090
 Tubes for cut outs
90 mm
Skip product gallery

Ähnliche Artikel

Kunststoffverschlussdeckel für Futterrohr
Kunststoffverschlussdeckel für Futterrohr
Sealing cap + formwork aid for WELLO and FASO lining tube reusable
Skip product gallery

Customers also viewed

Vitzthum-Baurohr Standard-Spiral
Vitzthum-Baurohr Standard-Spiral
Concrete form round in spiral version. Other lengths on request!
Slanted props (DC)
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Slanted props (DC)
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Thumb nut
Thumb nut
Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm
Slanted props (DC)
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Thumb nut
Thumb nut
Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm
Band saw UVB Z 500 S
Band saw UVB Z 500 S
Save time and effort at the building: with the band saw UVB Z 500 S for cutting gas-aereated concrete blocks and expanded clay - easy, quick and precise. The quick pay-back time makes it a profitable investment! Advantages: Torsionally rigid body. Practical transport position. Precise saw blade guidance. Saw table made of aluminium. Vulcanised rubber lining. Automatic limit stop. Quick changing of saw blade (also suitable for wood). On request with optional dust vacuum.
Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
ZZ-batten
ZZ-batten
Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.
This website uses cookies to ensure the best experience possible. More information...