Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Innen ø in mm: 250 mm

Tubes for cut outs

Product number: 26D0250

Available on request

Innen ø in mm

Price on request

m

Description

Material: Steel blank, optional steel galv. Special materials on request.

Standardlength 3 m, other lengths on request.

Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

 

Properties

Innen ø in mm: 250 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Innen ø in mm
Price
Action
26D0030
 Tubes for cut outs
30 mm
26D0040
 Tubes for cut outs
40 mm
26D0050
 Tubes for cut outs
50 mm
26D0055
 Tubes for cut outs
55 mm
26D0060
 Tubes for cut outs
60 mm
26D0065
 Tubes for cut outs
65 mm
26D0070
 Tubes for cut outs
70 mm
26D0075
 Tubes for cut outs
75 mm
26D0080
 Tubes for cut outs
80 mm
26D0090
 Tubes for cut outs
90 mm
Skip product gallery

Ähnliche Artikel

Kunststoffverschlussdeckel für Futterrohr
Kunststoffverschlussdeckel für Futterrohr
Sealing cap + formwork aid for WELLO and FASO lining tube reusable
Details
Skip product gallery

Customers also viewed

Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
KG - Bodendurchlässe
KG - Bodendurchlässe
MPA tested! KG pipe length 0.5 mwith water stop and one-sided sleeve without cover
Kunststoff-Futterrohr WELLO mit Quellband
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Stopper maxi mit Konusverschluss Ø 22 mm
Stopper maxi mit Konusverschluss Ø 22 mm
Mit dem Stopper können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten.Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar
Plugs unruffeld
Plugs unruffeld
Plastic plugs (colour gray) to close the spredaer after form removal.  
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
This website uses cookies to ensure the best experience possible. More information...