Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Abmessung in cm: 18 x 18 cm
Länge in cm: 18 cm

Aussparungs-Innenecken

Product number: 26BA018
Abmessung in cm
Stk

Description

Inner corner made of steel with clamping screws Ø 15 mm

For shaft formwork, ceilings- door- and wall-recess

  • Easy and fast mounting and dismantling
  • For wooden formwork 12 - 35 mm thickness
  • The fast and universal solution for your construction site

Properties

Abmessung in cm: 18 x 18 cm
Länge in cm: 18 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
26BA018
 Aussparungs-Innenecken
18 x 18 cm
26BA020
 Aussparungs-Innenecken
20 x 20 cm
26BA025
 Aussparungs-Innenecken
25 x 25 cm
26BA030
 Aussparungs-Innenecken
30 x 30 cm
26BA040
 Aussparungs-Innenecken
40 x 40 cm
26BA080
 Aussparungs-Innenecken
80 x 80 cm
26BA120
 Aussparungs-Innenecken
120 x 120 cm
Skip product gallery

Customers also viewed

Aussparungs-Innenecken
Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
Aussparungs-Innenecken
Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
Aussparungs-Innenecken
Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
Installationsbloc "Prottelith"
Installationsbloc "Prottelith"
Product properties: non-flammable passable  insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)
Aussparungs-Innenecken
Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete. Element length - 200 cm Material strength -  10 mm Width at foot - 70 mm
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
This website uses cookies to ensure the best experience possible. More information...