Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Abmessung in cm: 120 x 120 cm
Länge in cm: 120 cm

Aussparungs-Innenecken

Product number: 26BA120
Abmessung in cm
Stk

Description

Inner corner made of steel with clamping screws Ø 15 mm

For shaft formwork, ceilings- door- and wall-recess

  • Easy and fast mounting and dismantling
  • For wooden formwork 12 - 35 mm thickness
  • The fast and universal solution for your construction site

Properties

Abmessung in cm: 120 x 120 cm
Länge in cm: 120 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
26BA018
 Aussparungs-Innenecken
18 x 18 cm
26BA020
 Aussparungs-Innenecken
20 x 20 cm
26BA025
 Aussparungs-Innenecken
25 x 25 cm
26BA030
 Aussparungs-Innenecken
30 x 30 cm
26BA040
 Aussparungs-Innenecken
40 x 40 cm
26BA080
 Aussparungs-Innenecken
80 x 80 cm
26BA120
 Aussparungs-Innenecken
120 x 120 cm
Skip product gallery

Customers also viewed

Aussparungs-Innenecken
Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Swelling tape made of TPE (Flowstop)
Swelling tape made of TPE (Flowstop)
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete. Element length - 200 cm Material strength -  10 mm Width at foot - 70 mm
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Swelling tape made of TPE (Flowstop)
Swelling tape made of TPE (Flowstop)
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
This website uses cookies to ensure the best experience possible. More information...