Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Abmessung in cm
26BA018
Aussparungs-Innenecken
18 x 18 cm
26BA020
Aussparungs-Innenecken
20 x 20 cm
26BA025
Aussparungs-Innenecken
25 x 25 cm
26BA030
Aussparungs-Innenecken
30 x 30 cm
26BA040
Aussparungs-Innenecken
40 x 40 cm
26BA080
Aussparungs-Innenecken
80 x 80 cm
26BA120
Aussparungs-Innenecken
120 x 120 cm
Skip product gallery

Customers also viewed

Aussparungs-Innenecken
Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
Halteplatte zu Uni-Betonhülse
Nagelflansch mit Nagel für Uni Betonhülse (Art.Nr. 65U)
Speedies Bar Spacer 20 mm
Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Earthing round wire galvanized / stainless steel
Available in the following versions: Stainless steel. galvanized Further dimensions on request.
Installationsbloc "Prottelith"
Product properties: non-flammable passable  insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Concrete storage silo type 1017
Cylindrical-conical form with sealing clap at the end of the pipe incl.1,25 mpipe. On request: clamp or traverse hook welded on chains phasing out Ø 150 mm or Ø 200 mm forklift pockets