Properties

Abmessung in cm:	100 x 55 x 20 cm

Installationsbloc "Prottelith"

Product number: 26IP20

Available, delivery time: 1-3 days

Abmessung in cm

100 x 55 x 20 cm

100 x 55 x 22 cm

100 x 55 x 25 cm

100 x 55 x 30 cm

Price on request

Stk

Description

Product properties:

non-flammable
passable
insensitive to moisture
frost-resistent
easy perforation of openings

Bulk density: 300 kg m³, +- 5%

Compressive strength: 240 kPa (10% compression)

Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)

Abmessung in cm:	100 x 55 x 20 cm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Abmessung in cm	Price	Action
26IP20	Installationsbloc "Prottelith"	100 x 55 x 20 cm	Log in to see more information	Log in or Sign up
26IP22	Installationsbloc "Prottelith"	100 x 55 x 22 cm	Log in to see more information	Log in or Sign up
26IP25	Installationsbloc "Prottelith"	100 x 55 x 25 cm	Log in to see more information	Log in or Sign up
26IP30	Installationsbloc "Prottelith"	100 x 55 x 30 cm	Log in to see more information	Log in or Sign up

Product Nr. : 26IP20

Installationsbloc "Prottelith"

Price

Abmessung in cm: 100 x 55 x 20 cm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 26IP22

Installationsbloc "Prottelith"

Price

Abmessung in cm: 100 x 55 x 22 cm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 26IP25

Installationsbloc "Prottelith"

Price

Abmessung in cm: 100 x 55 x 25 cm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 26IP30

Installationsbloc "Prottelith"

Price

Abmessung in cm: 100 x 55 x 30 cm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Installationsbloc "Prottelith"

Product properties: non-flammable passable insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)

VIBA Plex F Formwork Board 10

The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable

Formwork stripes

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.

Aussparungs-Innenecken

Inner corner made of steel with clamping screws Ø 15 mm For shaft formwork, ceilings- door- and wall-recess Easy and fast mounting and dismantling For wooden formwork 12 - 35 mm thickness The fast and universal solution for your construction site

Installationsbloc "Prottelith"

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

KG-tube implementation

MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren

Betontrennmittel Viba-Trenn Bio FU Pflanzenöl

VIBA-Trenn Bio Schalöl FU ist ein auf pflanzlicher Basis und synthetischen Ester-Komponenten aus Pflanzenölen hergestelltes Betontrennmittel, das sowohl für saugende als auch für nichtsaugende Schalungen, z.B. aus Holz, Kunststoff, Stahl sowie zur Beton/Beton-Trennung in der Betonstein- und Fertigteilindustrie bestens geeignet ist. Es garantiert leichtes und sauberes Entschalen sowie glatte Oberflächen mit scharf profilierten Kanten. Aufgrund seiner Zusammensetzung ist das Produkt als ökologisch wertvoll einzustufen, da es ein beschleunigtes biologisches Abbauverhalten aufweist und als unschädlich für Mensch, Tier und Umwelt gilt. Eigenschaften: Einsatzbereich bis 100°C (Schalungstemperatur). frei von Wachsen, Paraffinen und Silikonen. umweltfreundliche und biologisch abbaubar. Enthält Zusätze gegen Oxidation und Korrosion.

Protective mats Super (frost protection)

The protective mats SUPER is bothsided coated with a white layer (Summer side) and a black layer (Winter side) Scope of application: Frost protection for Winter (enables concrete work to -5 Degree C without hardness decrease) Evaporation protection Protective covering Heat insulation

Deckenstützen Euro (DC) nach EN 1065

All versions with failure protection, accident proof. Props in different sizes and versions.Failure loads tested according to EN 1065. Produced and tested according to EN 1065, with covered thread (DC). With failure protection and accident proof. Threaded socket with additional bearing ring (slide ring). Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.