Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Höhe in mm: 550 mm

Schalstreifen für Aussparungen

Product number: 69S6550
Höhe in mm
Höhe in cm
m

Description

69SV Vario Formwork Strip for Recesses

On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation.

• Minimal installation time for creating recesses (only a few minutes).

• No stripping required after the concrete has cured (lost formwork).

• Virtually no material waste, as any remaining strip can be attached to a new roll and reused.

Properties

Höhe in mm: 550 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in mm
69S6192
 Schalstreifen für Aussparungen
192 mm
69S6210
 Schalstreifen für Aussparungen
210 mm
69S6220
 Schalstreifen für Aussparungen
220 mm
69S6240
 Schalstreifen für Aussparungen
240 mm
69S6250
 Schalstreifen für Aussparungen
250 mm
69S6260
 Schalstreifen für Aussparungen
260 mm
69S6315
 Schalstreifen für Aussparungen
315 mm
69S6345
 Schalstreifen für Aussparungen
345 mm
69S6355
 Schalstreifen für Aussparungen
355 mm
69S6415
 Schalstreifen für Aussparungen
415 mm
Skip product gallery

Customers also viewed

VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
VIBA - shuttering board HB
VIBA - shuttering board HB
Material: Wood concrete slab Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the concrete easy mounting through screws or nails (light nailing) Time saving  Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm Fixing strips is made of the same material as VIBA shuttering board
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
Betontrennmittel VIBA-Trenn - Multi Elio 28
Betontrennmittel VIBA-Trenn - Multi Elio 28
VIBA-Trenn - Multi Elio 28 ist ein gebrauchsfertiges Betontrennmittel, dessen physikalischen Eigenschaften eine einfache Entschalung des Betons nach dem Aushärten ermöglichen.Das Schalöl bildet einen nicht klebrigen Film, der die Trennung des Betons von der Formund eine glatte, perfekte Betonoberäche ermöglicht.Multi Elio 28 ist besonders geeignet für Stahl und nichtsaugende Holzschalungen sowie für Betonelemente die vertikal betoniert werden. Verbrauch:Stahlschalungen : 50 m/l Holzschalungen : 30 m/l
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Stop end panel with water bar holder wall/wall - plate/plate
Stop end panel with water bar holder wall/wall - plate/plate
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
Betontrennmittel VIBA-Trenn - Multi Elio 28
Betontrennmittel VIBA-Trenn - Multi Elio 28
VIBA-Trenn - Multi Elio 28 ist ein gebrauchsfertiges Betontrennmittel, dessen physikalischen Eigenschaften eine einfache Entschalung des Betons nach dem Aushärten ermöglichen.Das Schalöl bildet einen nicht klebrigen Film, der die Trennung des Betons von der Formund eine glatte, perfekte Betonoberäche ermöglicht.Multi Elio 28 ist besonders geeignet für Stahl und nichtsaugende Holzschalungen sowie für Betonelemente die vertikal betoniert werden. Verbrauch:Stahlschalungen : 50 m/l Holzschalungen : 30 m/l
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
This website uses cookies to ensure the best experience possible. More information...