Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Höhe in mm: 890 mm

Schalstreifen für Aussparungen

Product number: 69S6890
Höhe in mm
Höhe in cm
m
m

Description

69SV Vario Formwork Strip for Recesses

On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation.

• Minimal installation time for creating recesses (only a few minutes).

• No stripping required after the concrete has cured (lost formwork).

• Virtually no material waste, as any remaining strip can be attached to a new roll and reused.

Properties

Höhe in mm: 890 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in mm
69S6192
 Schalstreifen für Aussparungen
192 mm
69S6210
 Schalstreifen für Aussparungen
210 mm
69S6220
 Schalstreifen für Aussparungen
220 mm
69S6240
 Schalstreifen für Aussparungen
240 mm
69S6250
 Schalstreifen für Aussparungen
250 mm
69S6260
 Schalstreifen für Aussparungen
260 mm
69S6315
 Schalstreifen für Aussparungen
315 mm
69S6345
 Schalstreifen für Aussparungen
345 mm
69S6355
 Schalstreifen für Aussparungen
355 mm
69S6415
 Schalstreifen für Aussparungen
415 mm
Skip product gallery

Customers also viewed

Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
VIBA-Proofflex – Premium Waterstop Strip F 150 mm with Mounting Flange
VIBA-Proofflex – Premium Waterstop Strip F 150 mm with Mounting Flange
Double-sided fully coated, pressure-resistant waterstop element for construction joint sealing. The pressure-sensitive, fresh-concrete bonding coating with an enlarged surface area forms an exceptionally strong bond with the concrete and remains permanently active. A bentonite sealing strip is integrated at the overlap joint. Applications VIBA-Proofflex Premium is designed for the internal sealing of construction joints (maximum joint opening up to 0.25 mm) and controlled crack joints (maximum joint opening up to 1.0 mm) in reinforced concrete structures with high resistance to water penetration against: Ground moisture and non-pressurized water Pressurized water Areas subject to alternating water levels The sealing system complies with the requirements of Utilization Class A for Exposure Classes 1 and 2 in accordance with the German WU Guideline (Water-Impermeable Concrete Structures).
spacers with nail holes made of plastic
spacers with nail holes made of plastic
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
Betontrennmittel VIBA-Trenn RAPID
Betontrennmittel VIBA-Trenn RAPID
Solvent-Free Universal Release Agent A solvent-free universal release agent suitable for all common types of formwork used in building construction, civil engineering, and precast concrete plants. • Biodegradable formwork release oil with 99.7% biodegradability within 5–6 days, tested according to OECD 301 C/F • Consumption: approx. 30–35 g/m², depending on the type of formwork • Frost-resistant • When used correctly, it does not adversely affect the subsequent treatment of the concrete surface, such as plastering, tiling, wallpapering, or painting.
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
Schalstreifen für Aussparungen
Schalstreifen für Aussparungen
69SV Vario Formwork Strip for Recesses On site, the corrugated formwork strips are unrolled from the roll to the required length for the recess and can be cut to size easily by bending them back and forth along the transverse perforation. • Minimal installation time for creating recesses (only a few minutes). • No stripping required after the concrete has cured (lost formwork). • Virtually no material waste, as any remaining strip can be attached to a new roll and reused.
This website uses cookies to ensure the best experience possible. More information...