Properties

Medium pipe Ø:	25 - 63 mm
ø in mm:	100 mm

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm

Product number: 61LXN10103

Available, delivery time: 1-3 days

Price on request

Stk

Description

Super segment ring technology for cables and pipes

Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off

5 segment rings with a diameter of 25 - 63 mm

segment ring	Pipe area
Plug	Ø 25 - 28 mm
Nr. 1	Ø 32 mm
Nr. 2	Ø 40 mm
Nr. 3	Ø 50 mm
Nr. 4	Ø 63 mm

Medium pipe Ø:	25 - 63 mm
ø in mm:	100 mm

Downloads "Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm"

Download DBL_6LXN9_3EBD679D4558B64DC5F54CDBBFB6_D96BBE9A6694AA9EF92FA4BF6EB-1131

Customers also viewed

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm

Seal "onion ring" technology Ø 150 mm - fixed type 2 width 40 mm MR Ø 75, 90, 110 mm

Super segment ring technology for cables and pipes 3 segment rings with diameter lettering for Ø 75, 90 and 110 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Seal "onion ring" technology Ø 200 mm - divisible MR Ø 110, 125, 135, 160 mm

Super segment ring technology for cables and pipes segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plugs

Uni Futterrohr UFR, mit Anspachtelflansch

The lining tube of the future! - For every type of wall! The Uni casing pipe (UFR) is a plastic casing pipe with an octagonal filler flange (flange made of ABS). When using plastic-modified bitumen coatings (load case in accordance with DIN 18195 Part 4), the external seal can be applied via the filler flange. The profile web sealing tapes included in the scope of delivery ensure a secure seal even with double / element walls and waterproof concrete.Longitudinally watertight up to 1 bar in waterproof concrete (white tub).

ZZ-Leiste Iso 30 mm Länge 2 Meter

ZZ ISO rebar spacer is a skidproofed and tilt secured spacer for the bottom reinforcement. The material is PVC free. There will be no shrinking as the concrete encloses the batten completly. Suitable for XPS, isolation or other soft surfaces. Due to the special form a linear interruption can be avoided.

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Ringraumdichtung P-Cable Basic HRD Ø100

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

ZZ-Leiste Iso 25 mm Länge 2 Meter

Annular Seal - cable Ø 100 mm foldable

Annular seal - 4-fold cable Ø 100 mm MR Ø 6-40 mm Tested up to 10 m WS (1 bar) Hinged Annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / tube Ø 25, 32 or 40 mm as well as 3 cables Ø 6-18 mm completly gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage. MR = carrier pipe. Technical changes reserved.