Properties
| Abmessung in mm: | 20 x 5 mm |
|---|---|
| Farbe: | schwarz |
Bentonit Quellband "Long Time" folienbeschichtet
Available, delivery time: 1-3 days
Price on request
Properties
| Abmessung in mm: | 20 x 5 mm |
|---|---|
| Farbe: | schwarz |
Zubehör
Quellbandgitter LONG TIME mit beidseitigem Überstand.
Ähnliche Artikel
Bentonite swelling tape are proven reliable since many years. The tape swells by contact with water and seal cracks and construction joints safe and durable. The tests guarantee that the product can be used in many differnet applications. Advantages, which convince: Easy and safe installation No moulded parts and weldings No upstands Swell- and shrinkage proces is reversible Self-injecting effect Form stability and not sticky - the swelling tapes insists in cracks and cavities. No waste or remnants Environmentally friendly Safe through tests Installation:Swelling tape made of bentonite are mounted with grids or glues for swelling tapes. The tapes are laid within the reinforcment with 8 cm concrete cover. Test certificates: Dimension 25/20, audited to a water pressure of 50 metre water column Dimension 20/15, audited to a water pressure of 20 Metern water column suitable for Tidal zones Drinking water applications
Customers also viewed
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Expansive grouting mortar is a mixture of Portland cement, finely graded quartz sand and reactive chemical additives that achieve a swelling effect. It is used for casting anchor bolts, steel and precast concrete columns, for machine foundations and for closing concrete openings.
Standard chains - stock items Type C: EPDM rubber (black standard), galvanized screws The link chain required can be easily selected using the size chart.Depending on the dimension, a different number of links of the respective type are put together to form a chain. The following versions on request: Type BC: EPDM rubber (blue, extra soft for plastic pipes), galvanized screws Type S316: EPDM rubber (black), screws V4A stainless steel Type BS316: EPDM rubber (blue, extra soft for plastic pipe), screws V4A stainless steel Type O: rubber nitrile (green, oil-resistant), galvanized screws. Type OS316: rubber nitrile (green, oil-resistant), screws V4A stainless steel.
Standard chains - stock items Type C: EPDM rubber (black standard), galvanized screws The link chain required can be easily selected using the size chart.Depending on the dimension, a different number of links of the respective type are put together to form a chain. The following versions on request: Type BC: EPDM rubber (blue, extra soft for plastic pipes), galvanized screws Type S316: EPDM rubber (black), screws V4A stainless steel Type BS316: EPDM rubber (blue, extra soft for plastic pipe), screws V4A stainless steel Type O: rubber nitrile (green, oil-resistant), galvanized screws. Type OS316: rubber nitrile (green, oil-resistant), screws V4A stainless steel.
