Bentonite swelling tape are proven reliable since many years. The tape swells by contact with water and seal cracks and construction joints safe and durable.
The tests guarantee that the product can be used in many differnet applications.
General test certificate issued by an approved building inspectorate
Approved for drinking water applications
Advantages, which convince:
Easy and safe installation
No moulded parts and weldings
No upstands
Swell- and shrinkage proces is reversible
Self-injecting effect
Form stability and not sticky - the swelling tapes insists in cracks and cavities.
No waste or remnants
Environmentally friendly
Safe through tests
Installation: Swelling tape made of bentonite are mounted with grids or glues for swelling tapes. The tapes are laid within the reinforcment with 8 cm concrete cover.
Test certificates:
Dimension 25/20, audited to a water pressure of 50 metre water column
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate
Application:
The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
EXPANSION TAPE SK is a self-adhesive bentonite expansion tape which expands in contact with water and prevents water intrusion.In contact with water the tapes swell and seal the joint permanently.
Test certificates:
Tested by the university tBU Greven up to 50 m water column
Approved for the usage in contact with drinking waterApplication:
Waterproofed integration of pipings into concrete buildings.
Sealing of reinforcement connections.
Sealing of floor drains.
Installation:
Remove silicone paper and stick two rings of EXPANSION TAPE SK around the pipe, which has to be sealed.
Butt against the joint ends, no overlaps.
The surface of the pipes has to be hard.
EXPANSION TAPE SK adheres to metal, plastic, PVC and stone.
If necessary secure EXPANSION TAPE SK by using a binding wire.
Das Bentonit Quellband "Long Time" folienbeschichtet. Abmessung 20 x 5 mm, schwarz, auf 5 Bar geprüft.
Durch das Aufquellen und den beim Quellvorgang entstehenden Quelldruck wird ein Eindringen des Wassers verhindert. Das Bentonitquellband ist eine in Wasser quellfähige Dichtung. Es besteht aus fein vermahlenem, hochquellfähigem Tonmineral (Natrium-Bentonit), eingebettet, als Bindemittel, in eine Matrix aus nicht vulkanisiertem Kautschuk. Zur besseren Witterungsbeständigkeit ist es mit einer sich im Beton selbstauflösenden Folie umhüllt.
Achtung! Quellband nicht direkt nageln, nicht kleben - Befestigung nur mit Gitter! Verarbeitung siehe Datenblatt!
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate
Application:
The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
The "Yellow" Injection / Grout Hose is used to create watertight construction joints. The hose profile, with its optimized shape and structure, ensures particularly reliable and uniform filling of shrinkage gaps and voids.
Advantages of the PVC Grout Hose:
Easy installation
No clogging or cement laitance build-up during concreting
Uniform discharge of the injection material
Accessories available for every application
Officially tested and approved by the building authorities
Suitable for areas with fluctuating water levels
Complies with the German WU (watertight concrete) guidelines
EXPANSION TAPE SK is a self-adhesive bentonite expansion tape which expands in contact with water and prevents water intrusion.In contact with water the tapes swell and seal the joint permanently.
Test certificates:
Tested by the university tBU Greven up to 50 m water column
Approved for the usage in contact with drinking waterApplication:
Waterproofed integration of pipings into concrete buildings.
Sealing of reinforcement connections.
Sealing of floor drains.
Installation:
Remove silicone paper and stick two rings of EXPANSION TAPE SK around the pipe, which has to be sealed.
Butt against the joint ends, no overlaps.
The surface of the pipes has to be hard.
EXPANSION TAPE SK adheres to metal, plastic, PVC and stone.
If necessary secure EXPANSION TAPE SK by using a binding wire.
TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate
Application:
The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.
Rebar connector VIBA made of galvanized, structured and sheet housing for perfect connection with concrete and to transfer the shear forces.
Rebendable structural steel BST 550 with Austrian certificate (BST 500 on request available).
Standard - Elementlength 125 cm. Shorther lengths on request
For special types just send us the filled datasheets. We would be happy to create you an exclusive offer.
By draining waste water in a uniform flow direction without unnecessary edges, clogged pipes and nasty surprises are avoided. This can be done easily with the VIBA KG pipe bushing type UDM.
Thanks to the innovative connection, external KG pipes can be connected to the spigot with the socket without the flow direction of the waste water being influenced by additional edges. Clogged pipes: no chance! Filling flange (flange made of ABS). When using plastic-modified bitumen coatings (load case according to DIN 18195 Part 4), the outer seal can be applied using the filler flange.
Made of fibre concrete for horizontal mats- and round-bar steel reinforcement, easy execution with continuos threads.
The flat surface below by horizontal shift.
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance.
Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs.
Typical applications include:
Sealing and bonding in concrete construction for interior and exterior use
Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces
Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5)
Crack-bridging sealant up to 50 m water column
Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum
Well suited for bonding construction foils and membranes
Suitable for sealing and bonding applications requiring silicone-free systems on site
Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets.
Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE.
Product features and advantages:
Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum
Elastic
Non-corrosive
Neutral odor
Weathering and aging resistant
Good UV resistance
Virtually no shrinkage
No bubble formation
Paint-compatible
