Glue for swelling tapes

Gewicht / Karton:	11,60 kg
Typ:	Quellbandkleber für Bentonit- und EPDM Quellbänder; Kartusche 310 ml, Verbrauch: 1 Kart. / 8m
package piece:	20 Kartuschen Karton

Gewicht / Karton:	11,60 kg
Typ:	Quellbandkleber für Bentonit- und EPDM Quellbänder; Kartusche 310 ml, Verbrauch: 1 Kart. / 8m
package piece:	20 Kartuschen Karton

Swelling tape made of bentonite

Bentonite swelling tape are proven reliable since many years. The tape swells by contact with water and seal cracks and construction joints safe and durable. The tests guarantee that the product can be used in many differnet applications. General test certificate issued by an approved building inspectorate Approved for drinking water applications Advantages, which convince: Easy and safe installation No moulded parts and weldings No upstands Swell- and shrinkage proces is reversible Self-injecting effect Form stability and not sticky - the swelling tapes insists in cracks and cavities. No waste or remnants Environmentally friendly Safe through tests Installation:Swelling tape made of bentonite are mounted with grids or glues for swelling tapes. The tapes are laid within the reinforcment with 8 cm concrete cover. Test certificates: Dimension 25/20, audited to a water pressure of 50 metre water column Suitable for Tidal zones Drinking water applications

Swelling tape made of TPE (Flowstop)

TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.

Metal clamp with nail

Metal clamp with pre-mounted nail for all salable bolt guns For shooting and nailing Mounting all 15 cm

Compression hose - circular Ø 5/10 mm

Compression hose circular, dim. 5/10 mmwith fabric double-overcoat

Swelling tape made of TPE (Flowstop)

TPE (thermoplastic elastomer) - swelling tape for the safe sealing of construction joints and penetrations, in concrete structures, against the ingress of water. Because of the swelling and the swelling pressure generated during the swelling process no water can penetrate Application: The sealing of construction and connection joints in / on concrete structures in the foundation and groundwater area are typical applications for the FLOWSTOP high pressure swelling tape. As well as all types of penetrations of the building structure in areas that are to be permanently sealed against water. The FLOWSTOP high-pressure swelling tapes are easy, quick and inexpensive to install and are reliable and permanently sealed, even with high water pressure! In comparison to other sealing products no additional upstand is necessary.

Earthing round wire galvanized / stainless steel

Available in the following versions: Stainless steel. galvanized Further dimensions on request.

Cartridge gun for 310ml / cartridge

Cartridge gun used for cone glueing. Attention: Without Contact adhesive cartridge! The glue is a seperate article: Contact adhesive X1 cartridge / 290 mL

Fixing clip Ø 3 mm

Fixing clip Ø 2 mm for VIBA-Flexto fix the element joints.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Properties

Glue for swelling tapes

Description

Properties