Properties
| Bohrloch ø in mm: | 37 - 38 mm |
|---|---|
| Stab ø in mm: | 15 |
| Tragkraft: | 90 kN |
Rock anchor Ø 15 mm, aluminum, 3-part
Product number:
65CJ2
Available, delivery time: 1-3 days
Price on request
Properties
| Bohrloch ø in mm: | 37 - 38 mm |
|---|---|
| Stab ø in mm: | 15 |
| Tragkraft: | 90 kN |
Skip product gallery
Zubehör
Ankerstab Ø 15,0 mm (90 kN) schwarz
Hot-rolled steel. Self-cleaning D&W Twin-rib threaded steel. Standard length: 6m
Other lengths on request
Log in to see more information
Ankerstab Ø 15,0 mm (90 kN) verzinkt
Hot-rolled steel. Self-cleaning D&W Twin rib threaded steel.
other lengths on request
Log in to see more information
Skip product gallery
Ähnliche Artikel
Rock anchor Ø 15 mm - borehole 33-35 mm
For non-positive attachment to existing concrete or rock walls. The depth of the borehole depends on the type of rock or concrete.
Security advice:
Check tie points for load-bearing capacity before loading (there are different concrete qualities or types of rock)
Log in to see more information
Felsanker Ø 15 mm mit Zulassung
Zur temporären Aufnahme großer zentrischer Zugkräfte. Die Bohrlochtiefe hängt von der max. Belastung des Ankers und damit von der Setztiefe ab.
Zuverlässige Problemlösung und einfache Handhabung
Geprüft von der Universität Dortmund – Institut für Bauforschung
Zugelassen für den temporären Einsatz von sechs Monaten und Betonfestigkeiten von min. C 20/25 oder B 25, ungerissen und gerissen
Werkstoff: Weißer Temperguss (Lamellen: EN-GJMW-400-5, Konus: EN-GJMW-450-7)
Max. Zugkraft NRk,s= 158 kN
Log in to see more information
Skip product gallery
Customers also viewed
Felsanker Ø 15 mm mit Zulassung
Zur temporären Aufnahme großer zentrischer Zugkräfte. Die Bohrlochtiefe hängt von der max. Belastung des Ankers und damit von der Setztiefe ab.
Zuverlässige Problemlösung und einfache Handhabung
Geprüft von der Universität Dortmund – Institut für Bauforschung
Zugelassen für den temporären Einsatz von sechs Monaten und Betonfestigkeiten von min. C 20/25 oder B 25, ungerissen und gerissen
Werkstoff: Weißer Temperguss (Lamellen: EN-GJMW-400-5, Konus: EN-GJMW-450-7)
Max. Zugkraft NRk,s= 158 kN
Log in to see more information
Rock anchor Ø 15 mm - borehole 33-35 mm
For non-positive attachment to existing concrete or rock walls. The depth of the borehole depends on the type of rock or concrete.
Security advice:
Check tie points for load-bearing capacity before loading (there are different concrete qualities or types of rock)
Log in to see more information
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably!
Material: HDPE
Log in to see more information
Ankerhülse Alu mit PVC - Haltestopfen und Doppelkopfnagel
With internal thread for Ø 15 mm Dywidag tension rod.Perfect use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc.
Permissible load: 28 kN.
Log in to see more information
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.
Log in to see more information
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Log in to see more information
Plugs Vibadistanz Ø 22 mm
Material HDPE.
Appropriate for tubes with an outer diameter of 22 mm
Log in to see more information
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30
With internal winch for Ø 15 mm Dywidag tie rod.
Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc.
Permissible load 28KN
Log in to see more information
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance.
Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs.
Typical applications include:
Sealing and bonding in concrete construction for interior and exterior use
Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces
Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5)
Crack-bridging sealant up to 50 m water column
Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum
Well suited for bonding construction foils and membranes
Suitable for sealing and bonding applications requiring silicone-free systems on site
Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets.
Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE.
Product features and advantages:
Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum
Elastic
Non-corrosive
Neutral odor
Weathering and aging resistant
Good UV resistance
Virtually no shrinkage
No bubble formation
Paint-compatible
Log in to see more information
Skip product gallery
Customers also bought
VIBA - shuttering board HB
Material: Wood concrete slab
Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm
Advantages:
lost formwork doesn't have to be removed from the concrete
easy mounting through screws or nails (light nailing)
Time saving
Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm
Fixing strips is made of the same material as VIBA shuttering board
Log in to see more information
Knock-in anchor D&W Ø 15mm type 2 (grooved)
Type 2 grooved
With internal thread for O 15 mm Dywidag tie rod.
Borehole O 22 mm, borehole depth 95 mm.
Permissible load at least 17.0 kN for concrete strength 15N / mm2
Log in to see more information