Well foam 750 ml

Product number: 83R30006

Available, delivery time: 1-3 days

Price on request

Stk

Description

The well foam is a moisture-curing, one-component polyurethane assembly foam in B2 quality for bonding manhole rings and pipe elements. Resistant to water, dilute nitric acid, dilute caustic soda and all acids and bacteria normally found in the ground.

Field of use:

Assembly of well manhole rings and pipe elements made of concrete with seam connections or tongue and groove connections. Connection of pipes made of clay and ceramics or pipes made of PVC.

Customers also viewed

Insulation board adhesive 750 ml gun foam

The insulation board adhesive is a moisture-curing one-component polyurethane adhesive with low expansion for bonding and for the assembly of facade insulation boards (ETICS). After hardening, the insulation board adhesive is insoluble, waterproof, rot-proof, permanently elastic and can be plastered. The insulation board adhesive has a very good structure and offers excellent adhesion from + 5 ° C. The Braven Isokleber 750 is part of the product portfolio "Sustainable solutions for airtight construction". These products have been tested for thermal insulation, rain tightness and air leakage. When used correctly, these products help save energy in the building and are very close to energy-saving concepts such as passive houses and zero-energy houses. Benefits: B2 Efficient bonding of facade insulation panels Reduces working hours No water and no mixing on site No electricity needed Reduces storage requirements on the construction site Particularly environmentally friendly compared to conventional cement mortar

Gun cleaner 500 ml

The PU foam cleaner is a highly active cold cleaner for rinsing PU foam guns and removing fresh PU foam contamination. Field of use: PU foam cleaner was specially developed for removing fresh PU foam residues and for cleaning PU foam guns after use.

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Ankerstab Ø 20,0 mm

Warmgewalzter Stahl. Selbstreinigender D&W Doppelrippengewindestahl. Lieferlänge: ca. 6 m.Zuschnitte und Längen nach Wahl (max. 15 m). Schwarz oder verzinkt lieferbar. Standardlängen: 80, 100, 125, 150, 200, 250, 300 cm

Ankerstab Ø 20,0 mm

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline

Ankerhülse Alu mit PVC - Haltestopfen und Doppelkopfnagel

With internal thread for Ø 15 mm Dywidag tension rod.Perfect use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load: 28 kN.

Surface spacer Snake without nubs

Made of fibre concrete for horizontal mats- and round-bar steel reinforcement.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible