Properties

Ausführung:	Federlast
Gewicht / Stk:	164 kg
Tragkraft:	1800 kg

Crane fork with spring - height and laterally adjustable KG 1800 F h + s

Product number: 57KG1488

Product request

Salutation

First name*

Last name*

Company name*

Phone number

E-Mail-Address*

Straße*

PLZ*

Ort*

Quantity*

Stk

Crane fork with spring - height and laterally ad…

Message

To continue, enter the characters shown above*

Fields marked with asterisks (*) are required.

(Product number: 57KG1488)

Description

Crane with fork spring - heights and laterally adjustable: 1800 kg capacity

Usable height:	1200–1700 mm
Total length:	1100 mm
Total height unloaded:	1890–2390 mm
Total height loaded:	2120–2620 mm

Properties

Ausführung:	Federlast
Gewicht / Stk:	164 kg
Tragkraft:	1800 kg

Customers also viewed

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm

Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

VIBA - Rebar connection (Double row) type M

Metal box with rough surface.The surface polishing ensures a good connection with concrete and supports the transfer of shear forces. Rebendable structural steel BST550 with Austrian certificate. (BST 500 on request) Technical data: Standard - Elementlength 125 cm.Box heigth h1 = 3 cm; Other types on request. By Special types just fill the attached datasheet and send it to us per mail or fax.

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Suspension shoe for squared timber 100/100

Fits for squared timber 10 x 10 cm, for stacks and intermediate platforms.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

FB-Mauerstärken

Tube outside roughened. (Asbestos-free) Lenght 1,25m

Diem- concrete mixer tilting drum type Allround D 120C

Ahead of its time with the latest compact generation. Professionals use this concrete mixer Convenient operationThe most important operating elements such as toggle levers and switches are arranged in a user-friendly manner. Optimal size of the flanged drum openingExcellent accessibility and practical drainage of the concrete. Light and power connection innovatively combined in one machinePromises versatility on every construction site - 230V and 400V! Tried and tested chassisThe mobility on construction site terrain is guaranteed. The specially designed concrete mixer guarantees excellent mixing results. The tilting mixers drum type of the compact generation are extremely robust and maintenance-free, perfectly suited for daily construction site operations. Technical specifications: Motor 230/400V 0,75 KW Transmission 27 ¹ / min Capacity 180 l Mixing quantity 120 l Total heigth 1535 mm Total width 943 mm Total length 1350 mm Drum diameter 643 mm Drum heigth 631 mm Tilting gear - Weigth 151 kg Varnishing RAL 1013 Set of tiers Solid rubber

SBA basket

These spacer-baskets are situated between the upper and the lower reinforcment panels. They don't sit on the formwork (no plastic feet), therefore a proper exposed concrete can be arised.Packing units: big band at 800, 600, 400, 200 pieces, small band at 10 pieces.

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.