Contact adhesive X 1 cartridge / 290 ml High-quality, permanently elastic and varied Adhesive- and Sealing compound - permanently elastic - weatherproof - High tractive force - chlorine-resistant Package: 290 ml, 12 cartridge/carton (= 6,5 kg)
Kontaktkleber CEM 805 für Quellband-Fugenblech CEM805 (Kartusche 290 ml) ist ein einkomponentiger, geruchsneutraler Dicht- und Klebstoff auf der Basis eines MS-Hybrid Polymers. Er enthält keine Lösemittel, ist silikon- und isocyanatfrei, vernetzt neutral, ist anstrichverträglich und...
Evaporation protection VIBASOL Curing TC Version: Curing TC Is sprayed in a thin layer on fresh concrete surfaces that are further treated. The concrete surface is covered with a water-impermeable protective film and thus prevents premature drying out. Prevention of shrinkage...
Evaporation protection Antisol - E Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please...
Kleber für Faserbetonrohre Two component-special adhesive for water-proof bonding (incl. Hardener). Consumption for 1000 plugs 2 cm length: Ø 22 mm - ca. 3 kg Ø 27 mm - ca. 4 kg Ø 32 mm - ca. 5 kg Ø 40 mm - ca. 7 kg
Taumittel SNO-N-ICE Taumittel: Sno N Ice ist eine Alternative zu herkömmlichem Streusalz bei Einsatz auf Betonflächen. Ein Zusatz verhindert zuverlässig das abplatzen bzw. aussanden von Beton.
Expansive grouting mortar Betec 140 Expansive grouting mortar is a mixture of Portland cement, finely graded quartz sand and reactive chemical additives that achieve a swelling effect. It is used for casting anchor bolts, steel and precast concrete columns, for machine...
Gun cleaner 500 ml The PU foam cleaner is a highly active cold cleaner for rinsing PU foam guns and removing fresh PU foam contamination. Field of use: PU foam cleaner was specially developed for removing fresh PU foam residues and for cleaning PU foam...
PU foam gun The assembly pistol for comfortable, effective work. The plastic tubes included in the original box are only to be used for exposed areas that cannot be reached directly with the foam gun.
Gun well foam 750 ml Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with moisture from the...
Insulation board adhesive 750 ml gun foam The insulation board adhesive is a moisture-curing one-component polyurethane adhesive with low expansion for bonding and for the assembly of facade insulation boards (ETICS). After hardening, the insulation board adhesive is insoluble,...
Viewed