PU foam gun

Product number: 83R300051

Available, delivery time: 1-3 days

Price on request

Stk

Description

The assembly pistol for comfortable, effective work.
The plastic tubes included in the original box are only to be used for exposed areas that cannot be reached directly with the foam gun.

Zubehör

Gun cleaner 500 ml

The PU foam cleaner is a highly active cold cleaner for rinsing PU foam guns and removing fresh PU foam contamination. Field of use: PU foam cleaner was specially developed for removing fresh PU foam residues and for cleaning PU foam guns after use.

Insulation board adhesive 750 ml gun foam

The insulation board adhesive is a moisture-curing one-component polyurethane adhesive with low expansion for bonding and for the assembly of facade insulation boards (ETICS). After hardening, the insulation board adhesive is insoluble, waterproof, rot-proof, permanently elastic and can be plastered. The insulation board adhesive has a very good structure and offers excellent adhesion from + 5 ° C. The Braven Isokleber 750 is part of the product portfolio "Sustainable solutions for airtight construction". These products have been tested for thermal insulation, rain tightness and air leakage. When used correctly, these products help save energy in the building and are very close to energy-saving concepts such as passive houses and zero-energy houses. Benefits: B2 Efficient bonding of facade insulation panels Reduces working hours No water and no mixing on site No electricity needed Reduces storage requirements on the construction site Particularly environmentally friendly compared to conventional cement mortar

Gun well foam 750 ml

Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with moisture from the air and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections

Gun foam 750 ml

Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with humidity and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections

Customers also viewed

spacers with plastic nail flags

Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.

Gun foam 750 ml

Pistol foam well B3 is a permanent, one-component assembly foam based on polyurethane for bonding well manhole rings and pipes made of concrete, clay and ceramics. The foam seals and fills the joints and hardens with humidity and moisture from the substrate. Field of use : Well foam adheres excellently to concrete, plaster, masonry, clay, ceramics and many plastics. Assembly of well manhole rings or pipe elements with seam connections or tongue and groove connections

RiveStop Ø 24 mm x 70 mm SS intern-Einschub

TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.

spacers with nail holes made of plastic

spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.

Verfüllspritze gerader Schlitz 10 mm Modell 4

Die Verfüllspritze in verschiedene Modelle haben je Model einen Schlitz (10-18mm) oder eine Düse Ø 16mm. Die Handmörtelpumpe ermöglicht das einfache verschließen von Betonöffnungen mit Quellvergussmörtel.

Three-layer plate Standard, thick: 27 mm

Three layer plywood weather-resistant glued Surface with melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Verfüllspritze gerade Edelstahldüse Ø 16 mm Modell 8

RiveStop Ø 24 mm x 50 mm SS intern-Einschub

Hand riveting pliers with special head

For the INTERN RiveStop rivets A SIMPLE, FAST, COST-SAVING AND DURABLE SOLUTION The most suitable tool for installing RiveStop is an ambidextrous manual riveting machine with a long lever (nozzle size 4.8-5 mm / 0.18-0.19 in) or an electric riveting machine. Riveting is very quick and takes about 3 to 5 seconds per drill hole. If you use an electric riveting machine, it's even faster.

Verfüllspritze gerader Schlitz 18 mm Modell 1