Sealing plug Uni Concrete Sleeve
Available, delivery time: 1-3 days
Price on request
Zubehör
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
Ähnliche Artikel
Ankerhülse Alu (Art.Nr. 65UA) und Uni Betonhülse (Art.Nr. 65U).
Customers also viewed
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.