Betonkonus universal passend zu
Available, delivery time: 1-3 days
Price on request
Zubehör
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
With internal thread for Ø 15 mm Dywidag tension rod.Perfect use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load: 28 kN.
Ähnliche Artikel
Sealing plug after removal of the mounting equipment.
Customers also viewed
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Sealing plug after removal of the mounting equipment.
Ausführung Kunststoff (PVC).Passend für Montageanker groß (65CM15K) und klein (65CM15).Eventuell verschließen mit Stopfen Ø 20 mm. a = Innendurchmesser
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.
Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.
Mit dem Stopper können Mauerstärken aus Faserzement und Kunststoff innen druckdicht verschlossen werden. Beständigkeit: Wasser, UV, Ozon, verdünnte Säuren + Laugen, Gülle + Jauche, Gärungsmaische, Öle + Bitumen, Radon + Methangas, Temperaturbereich - 35 bis + 70 °C Material TPE Druckprüfung nach beidseitigem Verschluss der Faserbetonrohre: Wasserdicht bis 3 bar, Druckprüfung MFPA Leipzig Erweiterte Druckprüfung von 21,5 bis 23,0 mm Prüfzeugnis für den Stopfen zur Abdichtung in Rohrinnenseite. Bitte Einbauanleitung für Stopper anfordern und beachten. Brandprüfung: Feuerwiderstandsklasse E1 120 nach DIN EN 13501-2 mit Faserbetonmauerstärken Klassifikation DIN EN 13501-1 E = normalentflammbar DIN EN 4102-1 B2 = normalentflammbar