Sort by:
VIBA- Rebar connection (Single row)
Rebar connector VIBA made of galvanized, structured and sheet housing for perfect connection with concrete and to transfer the shear forces.
Rebendable structural steel BST 550 with Austrian certificate (BST 500 on request available).
Standard - Elementlength 125 cm. Shorther lengths on request
For special types just send us the filled datasheets. We would be happy to create you an exclusive offer.
Log in to see more information
VIBA -Rebar connection two-rowed type M
Metal box with rough surface.The surface polishing ensures a good connection with concrete and supports the transfer of shear forces.
Rebendable structural steel BST550 with Austrian certificate. (BST 500 on request)
Technical data:
Standard - Elementlength 125 cm.Box heigth h1 = 3 cm;
Other types on request.
By Special types just fill the attached datasheet and send it to us per mail or fax.
Log in to see more information
Mauerverbinder Typ 2
Wall connector for bricks- and stone wall.
Other strengths and design on request.
Log in to see more information
Masonry tie channels Type HMS 25/15-D galv.
To fixtate outgoing masonry walls on concrete.
The brick tie anchors can be used at any desired position across the total length of the brick tie channel.
Log in to see more information
VIBA dowel-sleeve
Bearing made of plastic to absorb moving forces of VIBA shear force dowel.
The quill zone allows a longitudinal movement up to 20 mm.
In the colours:
yellow
gray
green
blue
black
available.
Log in to see more information
VIBA - Querkraftdorn - Dorn blank
Type blank
Other lengths and dimensions on request.
Log in to see more information
VIBA - Querkraft - Dorn Edelstahl
Steel quality: Stainless steel
Other lenghts and dimensions on request!
Log in to see more information
VIBA - Querkraftdorn - Dorn verzinkt
Steel quality: S 235 JR (ST37)
Surface galvanized
Other lengths and dimensions on request
Log in to see more information
Kugelkopfabheber mit Ovalglied
suitable for 3.0-5.0 tons and stop at the crossbar.
Log in to see more information
Aussparungskörper rund aus Gummi für Kugelkopfanker
Aussparungskörper rund aus Gummi für verschiedene Kugelkopfanker.
Log in to see more information
![Ball head anchors 2,5 Tons [K2,5]](https://www.vitzthum.com/media/4c/e1/12/1741790298/69OP25-725.jpg?ts=1770726697 "Ball head anchors 2,5 Tons [K2,5]")
Ball head anchors 2,5 Tons [K2,5]
Ball head anchors are used to transport prefabricated parts.
K2.5 load group = 2.5 tons
easy to weld and 3-fold safety against material failure.
Log in to see more information
![Kugelkopfanker 5,0 Tonnen [K5]](https://www.vitzthum.com/media/69/c7/37/1741790298/69OP_-726.jpg?ts=1770726721 "Kugelkopfanker 5,0 Tonnen [K5]")
Kugelkopfanker 5,0 Tonnen [K5]
Ball head anchors are used to transport prefabricated parts.
K5 load group = 5 tons
easy to weld and 3-fold safety against material failure.
Log in to see more information
Profilierter-Edelstahlstab "V4A 1.4571"
A cold-formed, not rusting rebar, high strength for starter bars and anchorage.
Log in to see more information
ISITHERM Maxi
Insulation is very important by building construction. A special problem zone are overhanging building components which can cause a massive energy waste through thermal bridges.
The highly developed Thermoelement ISITHERM provide a perfect Insulation-connection and solve this problem.
Dimension and material
Heigth
16, 18, 20, 22, 25 cm
Insulation-strength
10 cm
Elementlength
Standard 75 cm, Maxi 50 cm (by equal number iron)
Weigth
ca. 4,50 kg
Insulating material
Reinforcement
EPS Plus
Steel St 37
Log in to see more information
ISITHERM Standard
Insulation is very important by building construction. A special problem zone are overhanging building components which can cause a massive energy waste through thermal bridges.
The highly developed Thermoelement ISITHERM provide a perfect Insulation-connection and solve this problem.
The ISITHERM Thermo elements can be deliverd in R90 (fire resistance class) for special fire protection requirements. For this purpose are fire protection plates attached to the bottom of the element. This classification can just be provided if all connected components are R90.
Dimension and material
Heigth
16, 18, 20, 22, 25 cm
Insulation-strength
10 cm
Elementlength
Standard 75 cm, Maxi 50 cm (by equal number iron)
Weigth
ca. 4,50 kg
Insulating material
Reinforcement
EPS Plus
Steel St 37
Log in to see more information
ISITHERM Standard Querkraft
Insulation is very important by building construction. A special problem zone are overhanging building components which can cause a massive energy waste through thermal bridges.
The highly developed Thermoelement ISITHERM provide a perfect Insulation-connection and solve this problem.
Dimension and material
Heigth
16, 18, 20, 22, 25 cm
Insulation-strength
10 cm
Elementlength
Standard 75 cm, Maxi 50 cm (by equal number iron)
Weigth
ca. 4,50 kg
Insulating material
Reinforcement
EPS Plus
Steel St 37
Log in to see more information
ISIBLOCK; Zwischenelement für ISITHERM
Insulation element made of EPS as intermediate element to ISITHERM connection-element for a continuous insulation plane.
Log in to see more information