With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no...
All versions with failure protection, accident proof. Props in different sizes and versions. Failure loads tested according to EN 1065. Produced and tested according to EN 1065 , with covered thread (DC). With failure protection and...
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no...
Horizontal frame-elements for formworks of fundaments. Anchoring: On top with anchor rod Ø 15,0 mm and "super" nut. On base with VIBA-foundation tensioner and VIBA-punched steel strip. Wall thicknesses within a 5 cm grid can be produced....
Lattenpfahl lackiert zur Absicherung auf der Baustelle. Pfahl mit 2 Bügel für z.B. Absperrlatten.
Lattenpfahl lackiert zur Absicherung auf der Baustelle. Pfahl mit 2 Bügel für z.B. Absperrlatten.
Used in conjunction with the wooden panel with door The internal staircase enables safe and convenient access to the scaffolding available lacquered or hot-dip galvanized Delivery is WITHOUT wooden panel with door
Galvanized railing posts for trestles, construction site stairs and consoles . Side protection is required from a height of 2 m.
Railing holder type S is screwed into the concreted anchor case or the corner adapter, e.g. in balcony plates, bridge cornices, ceiling edges, cantilever plates... All board holders are swivelling around 360°. The corner adapter is...
Viewed