Building needs

Super segment ring technology for cables and pipes segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width...

Seal for pressing and non-pressing water Tested for continuous use up to 30 m water column Press plates and screws made of V2A stainless steel Sealing width 40 mm NBR rubber insert Temperature range -30 ° C to + 120 ° C

The well foam is a moisture-curing, one-component polyurethane assembly foam in B2 quality for bonding manhole rings and pipe elements. Resistant to water, dilute nitric acid, dilute caustic soda and all acids and bacteria normally found...

Wave anchor to anchore single-sided system to the floor, to mount formwork element, A-frames, scaffolding bracket, etc.

Super segment ring technology for cables and pipes 3 segment rings with diameter lettering for Ø 75, 90 and 110 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm,...

Cartridge gun used for cone glueing. Attention: Without Contact adhesive cartridge! The glue is a seperate article: Contact adhesive X1 cartridge / 290 mL

The Flex 2000 cartridge is clamped in the cartridge gun and pressed into the penetration from back to back with an attached flexible spray nozzle in a layer thickness of at least 8 cm.

Wave anchor to anchore single-sided system to the floor, to mount formwork element, A-frames, scaffolding bracket, etc.

Load-bearing construction, also suitable for heavy reinforcement. Shorter length than conventional bottom bar! Flexible and efficient installation thanks to a length of 80 cm. Can also be used upside down on soft surfaces. Test...