Properties

Cuttin disc ø:	450mm/30mm
Cutting height:	153 mm
Engine Power:	4,2 / 3,2 kW
Rpm:	2760 U/min
Table size:	1110 / 750 / 850 mm
Vibration frequency:	50 Herz

Construction saw AVOLA tyoe IC 450-10

Product number: 56C02451

Product request

Salutation

First name*

Last name*

Company name*

Phone number

E-Mail-Address*

Quantity*

Stk

Construction saw AVOLA tyoe IC 450-10

Message

Fields marked with asterisks (*) are required.

(Product number: 56C02451)

Description

More Safety with new norm EN 1870-1

Saw incl. 1 HM saw blade (nailed down)

Standard equipment:

Safety hood – table extansion
adjustable angle cutting device
undertable guideway, securely protected
Parallel stop with measuring scale
high quality TCT sawblade, noise reduced
machine frame completely galvanized, torsion - resistant
powerful motors with extensive reserves of safety, with magnetic brake
4 loading – unloading devices

Special equipment:

Driving device
Table extansion
Angle cutting device
Roller trestle

Technical data:

Motor power output P1/P2**	KW	4,2/3,2
Three – phase current	Volt	400
AC current	Volt	–
Equipment plug		CEE 516
Fuses, time lag	Amp.	16
Speed	U/min	2760
Sawblade dia. / bor hole	mm	450/30
Cuttung height	mm	153
Table size L x W	mm	1110 x 750
Table height	mm	850
Weight	kg	121

Cuttin disc ø:	450mm/30mm
Cutting height:	153 mm
Engine Power:	4,2 / 3,2 kW
Rpm:	2760 U/min
Table size:	1110 / 750 / 850 mm
Vibration frequency:	50 Herz

Zubehör

Switch/Plug combination with cable

Passend für Avola IC 450 BK 450 Nr. 158008

Ähnliche Artikel

Construction saw AVOLA BK-450-10

More Safety through EN 1870-1 Saw incl. 1 HM saw blade (nailed down) Standard equipment: Safety hood – table extansion adjustable angle cutting device undertable guideway, securely protected Parallel stop with measuring scale high quality TCT sawblade machine frame completely galvanized, torsion - resistant powerful motors with extensive reserves of safety, with magnetic brake 4 loading – unloading devices Technical Data: Motor power output P2** KW 3 Three – phase current Volt 400 Frequency Hz 50 Sawblade dia. / bor hole mm 450/30 Cuttung height mm 135 Table size L x W mm 1079 x 750 Table height mm 850 Weight kg 113

Construction saw model TZV 315 - 400 V

Saw incl. 1 HM saw blade (nailed down) Standard equipment: Adjustable cross and rip cutting fences, hinged Parallel and cross stop with angular adjustable mitre box, precisely guided in friction bearings Table width extansion high-quality TCT saw blade hot-dip galvanized, distortion-proof machine frame powerful motor Jack rings Inclination and height adjustment Special equipment: Transport wheels for easy manoeuvrability Bench extension and enlargement Extraction device Technical data: TZV 315 Motor power input/output KW 3,1/2,2 Nominal current A 4,9 AC current V 400 DS Frequency Hz 50 Speed U/min 2800 Blade diameter / bore mm 315/30 Cuttung height mm 0-90 Inclination 0-45° Cutting height 45° mm 0 – 72 Table size L / W / H mm 956/575/850 Weight kg 77 Emission sound pressure runat load-no load dB 82,4/85,5 Sound performanceat load-no load dB 90,4/94,0

Customers also viewed

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Cover profile for dimpled sheet

Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.

Rebar spacer CLOSED

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

Formwork oil Prägnit ST300

VIBADISTANZ spacer tube (VDZ) incl. 2 plugs

Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE

Betonklötze mit Draht 30 mm

Stable spacer made of concrete for wall- and ceiling-reinforcement. Also available without wire.

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Lower-Prop head, galvanised

Suitable for props for hole Ø 40 mm. For wood formwork beams H 20

Miniprismas RSMP290M mit Drehteller - magnetisch

Mini Prisma RSMP290(M*) mit silberbeschichteten Ø 17,5 mm Prisma, dreh- und kippbar RSMP290 kann zur schnellen Montage sogar auf schwierigem Untergrund wie z.B. Glas- und Marmorfassaden, historischen Gebäuden, Gas- und Ölpipelines usw. einfach aufgeklebt oder mit Dübeln und Schrauben fixiert werden. Für die einfache Montage bei Stahlkonstruktionen werden die Bodenplatten auch in einer magnetischen Ausführung angeboten. Beim Einsatz von Tachymeter und Totalstation kann das Prisma immer genau auf das Messinstrument ausgerichtet werden kann das Prisma in einem Radius von 360º gedreht werden und ermöglicht dadurch die Nutzung des gleichen Vermessungspunktes aus unterschiedlichen Richtungen können Brücken, Fassaden und viele andere Objekte noch schneller und präziser beobachtet werden Bei Einsatz von Robotik-Totalstationen können permanente Setzungsmessungen während der Bauarbeiten durchgeführt werden