Properties
| Cutting height: | 135 mm |
|---|---|
| Engine: | P2** 3 kW |
| Rpm: | 2760 U/min |
| Table size: | 1079 / 750 / 850 mm |
| Vibration frequency: | 50 Hz |
Construction saw AVOLA BK-450-10
Product number:
56C02452
Product request
Properties
| Cutting height: | 135 mm |
|---|---|
| Engine: | P2** 3 kW |
| Rpm: | 2760 U/min |
| Table size: | 1079 / 750 / 850 mm |
| Vibration frequency: | 50 Hz |
Skip product gallery
Ähnliche Artikel
Construction saw AVOLA tyoe IC 450-10
More Safety with new norm EN 1870-1
Saw incl. 1 HM saw blade (nailed down)
Standard equipment:
Safety hood – table extansion
adjustable angle cutting device
undertable guideway, securely protected
Parallel stop with measuring scale
high quality TCT sawblade, noise reduced
machine frame completely galvanized, torsion - resistant
powerful motors with extensive reserves of safety, with magnetic brake
4 loading – unloading devices
Special equipment:
Driving device
Table extansion
Angle cutting device
Roller trestle
Technical data:
Motor power output P1/P2**
KW
4,2/3,2
Three – phase current
Volt
400
AC current
Volt
–
Equipment plug
CEE 516
Fuses, time lag
Amp.
16
Speed
U/min
2760
Sawblade dia. / bor hole
mm
450/30
Cuttung height
mm
153
Table size L x W
mm
1110 x 750
Table height
mm
850
Weight
kg
121
Construction saw model TZV 315 - 400 V
Saw incl. 1 HM saw blade (nailed down)
Standard equipment:
Adjustable cross and rip cutting fences, hinged
Parallel and cross stop with angular adjustable mitre box, precisely guided in friction bearings
Table width extansion
high-quality TCT saw blade
hot-dip galvanized, distortion-proof machine frame
powerful motor
Jack rings
Inclination and height adjustment
Special equipment:
Transport wheels for easy manoeuvrability
Bench extension and enlargement
Extraction device
Technical data:
TZV 315
Motor power input/output
KW
3,1/2,2
Nominal current
A
4,9
AC current
V
400 DS
Frequency
Hz
50
Speed
U/min
2800
Blade diameter / bore
mm
315/30
Cuttung height
mm
0-90
Inclination
0-45°
Cutting height 45°
mm
0 – 72
Table size L / W / H
mm
956/575/850
Weight
kg
77
Emission sound pressure runat load-no load
dB
82,4/85,5
Sound performanceat load-no load
dB
90,4/94,0
Skip product gallery
Customers also viewed
Protection cap VIBAProtect H
Comply with the requirements for covering vertical reinforcement bars in accordance with § 6 (4) BauV.
The protective cap is made of special plastic and it is made in one piece. The cap has a steel insert for optimal safety. The hourglass-shaped body minimizes wear and tear and ensures optimal grip on the iron.
The head is optimized for the Austrian market. Therefore, it can also be attached without any problem even when the iron gaps are smaller .
Advantages:
Narrow head for small iron gaps
Reusable
Weatherproof
PVC - free
Log in to see more information
Stop end panel with water bar holder wall/wall - plate/plate
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
Log in to see more information
Stop end panel with water bar holder wall/wall - plate/plate
Stop end panel made of a wave-profiled perforated metal plate in order to set a stop end in the wall or in the bottom plate.
Log in to see more information
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30
With internal winch for Ø 15 mm Dywidag tie rod.
Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc.
Permissible load 28KN
Log in to see more information
Construction-compensated foil
Compensated foil for window. The compensated foil can bear more burden through the grid-construction as standard foils.
Features:
Transparent, UV-stabilized
Log in to see more information
Cover profile for dimpled sheet
Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction.
Material: HDPE, Fire behavior: B2 DIN 4102.
Log in to see more information
Rebar spacers with sidewise recesses
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement.
Mill length 200 cm.
Other lengths on request.
Log in to see more information
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks.
Good degradable with certificate
Mixture of mineral oil and plant-based oil
Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.
Degredable for 81% within 21 days.
Log in to see more information
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Log in to see more information