Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Höhe in cm: 20 cm
Länge in m: 10 m

Formwork stripes

Product number: 69S2320

Available on request

Länge in m
Höhe in cm

Price on request

m
m

Description

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15.

The profiling allows optimum connection in concrete.

Available in all heights from 14 to 36 cm.

Installation instruction:

1. Cut the needed length with a cutter from the roll.

2. Fold the formwork stripes in the required size.

3. Connect the overlapped endings with binding wire.

4. Nail the recess quiver sideward through the punch opening.

Properties

Höhe in cm: 20 cm
Länge in m: 10 m
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in cm
Länge in m
Price
Action
69S2320
 Formwork stripes
20 cm
10 m
69S2322
 Formwork stripes
22 cm
10 m
69S2325
 Formwork stripes
25 cm
10 m
69S2330
 Formwork stripes
30 cm
10 m
69S2350
 Formwork stripes
50 cm
6,0 m
Skip product gallery

Customers also viewed

Ripped drawb netak Lochripp
Ripped drawb netak Lochripp
Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork  
Ribbed drawn metal Superrip
Ribbed drawn metal Superrip
Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm
Ribbed drawn metal Superrip
Ribbed drawn metal Superrip
Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm
KG-tube implementation
KG-tube implementation
MPA geprüft! Die KG-Rohrdurchführungen werden in den Durchmessern DN 100 bis DN 200 gefertigt. Alle gängigen Wandstärken von 200 bis 400 mm sind einbaufertig als Doppelmuffenrohr sofort aus Lagervorrat lieferbar. Die Rohrdurchführung ist werkseitig mittig mit einem Mauerkragen versehen, der verhindert, dass Feuchtigkeit ins Bauwerk eindringen kann. Die Rohrdurchführungen eignen sich für den Beton- und Mauerwerksbau. Die druckwasserdichten Hauseinführungen haben eine hohe Witterungs- und Ozonbeständigkeit, sowie eine gute Säure- und Laugenbeständigkeit. Sie können in Bereichen von -30°C bis +100° C eingesetzt werden. Lieferung:Die KG-Rohrdurchführung wird auf Wandstärke gefertigt geliefert.Pro Rohrdurchführung sind zwei Dichtungen und zwei Schalungs- bzw. Verschlussdeckel im Lieferumfang enthalten.Montage KG-Muffenstopfen an die Wandschalung nageln Dichtung in die Rohrdurchführung einlegen. Rohrdurchführung auf den Muffenstopfen schieben. Die zweite Seite der Rohrdurchführung mit dem Stopfen verschließen und mit einem von aussen durch die Schalung geschlagenen Nagel fixieren
VIBA-flex joint sheet metal roll - 150 mm
VIBA-flex joint sheet metal roll - 150 mm
The joint tape roll is made of galvanized stell with a both sided polymer-bitumen coating. The coating is protected by a paper which is lenghtwise split for easier usage. Roll á 20 lfm
Vitzthum-Baurohr Standard-Spiral
Vitzthum-Baurohr Standard-Spiral
Concrete form round in spiral version. Other lengths on request!
Montageanker GTW 45 15,0 mm
Montageanker GTW 45 15,0 mm
Ausführung schwarz. Zur Befestigung in Schalung wird der Montagefuß (65CM15F) empfohlen. Einbautiefe: 108 mm, Betongüte: >= B 25.Max. Tragkraft mit 3-facher Sicherheit bei: B25 = 30kN, B35 = 40 kN. Prüfbescheinigung in Anlehnung DIN 18216
Ripped drawb netak Lochripp
Ripped drawb netak Lochripp
Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork  
VITZTHUM construction pipe RECTANGULAR
VITZTHUM construction pipe RECTANGULAR
Formwork tube for rectangular columns Standard lengths 3m and 4m Other lengths on request!
VIBA-Flex Joint sheet 150 mm with mounting-base
VIBA-Flex Joint sheet 150 mm with mounting-base
Available in one side and both side coated design Without fixing clip.
This website uses cookies to ensure the best experience possible. More information...