Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Höhe in cm: 22 cm
Länge in m: 10 m

Formwork stripes

Product number: 69S2322

Available on request

Länge in m
Höhe in cm

Price on request

m
m

Description

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15.

The profiling allows optimum connection in concrete.

Available in all heights from 14 to 36 cm.

Installation instruction:

1. Cut the needed length with a cutter from the roll.

2. Fold the formwork stripes in the required size.

3. Connect the overlapped endings with binding wire.

4. Nail the recess quiver sideward through the punch opening.

Properties

Höhe in cm: 22 cm
Länge in m: 10 m
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in cm
Länge in m
Price
Action
69S2320
 Formwork stripes
20 cm
10 m
69S2322
 Formwork stripes
22 cm
10 m
69S2325
 Formwork stripes
25 cm
10 m
69S2330
 Formwork stripes
30 cm
10 m
69S2350
 Formwork stripes
50 cm
6,0 m
Skip product gallery

Customers also viewed

Formwork stripes
Formwork stripes
The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
Formwork stripes
Formwork stripes
The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.
Kunststoffverschlussdeckel für Futterrohr
Kunststoffverschlussdeckel für Futterrohr
Sealing cap + formwork aid for WELLO and FASO lining tube reusable
Kunststoffverschlussdeckel für Futterrohr
Kunststoffverschlussdeckel für Futterrohr
Sealing cap + formwork aid for WELLO and FASO lining tube reusable
ZZ-batten
ZZ-batten
Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.
Coupling nut Ø 15,0 mm
Coupling nut Ø 15,0 mm
Coupling nut for Ø 15 - Ø 26,5 mm
Welded coupler round
Welded coupler round
Type black - round  
Kunststoff-Futterrohr WELLO mit Quellband
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Formwork stripes
Formwork stripes
The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.
This website uses cookies to ensure the best experience possible. More information...