Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Kunststoffverschlussdeckel für Futterrohr

Properties

ø in mm: 300 mm

Kunststoffverschlussdeckel für Futterrohr

Product number: 61LXFRD300

Available, delivery time: 1-3 days

ø in mm

Price on request

Stk

Description

Sealing cap + formwork aid for WELLO and FASO lining tube

reusable

Properties

ø in mm: 300 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
ø in mm
Price
Action
61LXFRD100
 Kunststoffverschlussdeckel für Futterrohr
100 mm
61LXFRD125
 Kunststoffverschlussdeckel für Futterrohr
125 mm
61LXFRD150
 Kunststoffverschlussdeckel für Futterrohr
150 mm
61LXFRD200
 Kunststoffverschlussdeckel für Futterrohr
200 mm
61LXFRD250
 Kunststoffverschlussdeckel für Futterrohr
250 mm
61LXFRD300
 Kunststoffverschlussdeckel für Futterrohr
300 mm
61LXFRD350
 Kunststoffverschlussdeckel für Futterrohr
350 mm
61LXFRD400
 Kunststoffverschlussdeckel für Futterrohr
400 mm
61LXFRD80
 Kunststoffverschlussdeckel für Futterrohr
80 mm
Skip product gallery

Ähnliche Artikel

Aussparungsrohre - Ausführung blank

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  

Details
Skip product gallery

Customers also viewed

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

KG-Muffenring

For floor outlets

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm

Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring Pipe area Plug Ø 25 - 28 mm Nr. 1 Ø 32 mm Nr. 2 Ø 40 mm Nr. 3 Ø 50 mm Nr. 4 Ø 63 mm

Fiber cement wall sleeves

The fiber cement wall sleeves are available for immediate delivery from DN 80 to DN 600. The tube is smooth on the inside and roughened on the outside. Because the undulating outside connects with the concrete no water circulation occurs.

Kunststoffverschlussdeckel für Futterrohr

Sealing cap + formwork aid for WELLO and FASO lining tube reusable

Kunststoff-Futterrohr WELLO mit Quellband

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.

VIBA-PulsePressSealing closed

Die SchlagPressDichtung verfügt über ein neuartiges Ringspalt-Verpress-System und ermöglicht dadurch eine schnelle, perfekte und äußerst baustellengerechte Rohrdurchführung an bestehenden Bauwerken. Es lassen sich nahezu alle Medienrohre- wie z.B. Abwasser-, Kabelschutz-, Wasser- oder Gasrohre sicher durch Keller- oder durch entsprechende Schachtbauwerke bzw. SB-Rohre hindurchführen oder anschließen gegen drückendes Wasser dauerhaft abdichten. MFPA geprüft! in Anlehnung an FHRK GE101 2,5 bar Druckwasserdicht!

Anschlusstrichter AT 110 ohne KG-Rohr

Anschlusstrichter mit und ohne vormontiertes KG-Rohr erhältlich. Eigenschaften und technische Daten: lieferbar in DN 100 (Außendurchmesser 110 mm) Auslieferung inkl. Verschlussdeckel als Schutz gegen Beton und Schmutz, trittsicher und stolperfrei Trichter ø innen = 250 mm, ø aussen = 370 mm maximaler Versatz 90 mm • Anschlusstrichter aus ABS WU-Beton Beanspruchungsklasse 1, Beanspruchungsklasse 2 DIN 18533 W1.1-E, Bodenfeuchte Gas- und wasserdichte Verbindung mit der Bodenplatte dank integrierter Dreistegdichtung KIWA-Geprüft aus Radondichtem ABS - Kunststoff mit integrierter Libelle zur lagemäßigen Ausrichtung des Anschlußtrichters kann zur Bodenplattenentwässerung während der Bauphase verwendet werden; integrierte Schmutzfangrillen

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

This website uses cookies to ensure the best experience possible. More information...